Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Question for Darrell Feltmate

Posts

Question for Darrell Feltmate

#1

Question for Darrell Feltmate

GaryG in MD

>Darrell,

As a result of seeing Allen Neighbors' recent photo of his Oland tools, I downloaded some video from your "Oland Tool" page. Specifically, the link you call "second". I did stop action on it, and it appears to me that the tool has a straight edge with sharp corners (see attached frame grab). I would call this a "bedan". I'm not sure what the definition of an Oland Tool is, but all the pictures I've seen of them show rounded noses. I would appreciate it if you could clarify the situation for me. Thanks.

Gary


img

Re: Question for Darrell Feltmate

#2

Re: Question for Darrell Feltmate

Bill Crommett

>I, too, would like an amplification of the specifics of the Oland tools.. I have one Oland tool, and that is a cut-off tool which is superb.

Re: Question for Darrell Feltmate

#3

Re:Here are my 3 original Oland......

JamieDonaldson

>.........tools. They are basically spindle scrapers in order L to R : 3/16" angled in drill rod shaft, 1/4" and 3/16" straight shaft. I use the angled hollowing tool much more than the other 2, and it is a favorite weapon of choice among my many other hollowers when not cutting too far under a shoulder.


img

Re: Question for Darrell Feltmate

#4

Leo Van Der Loo

Re: Question for Darrell Feltmate *LINK*

Leo Van Der Loo

>You could have a look where he is sharpening the tool, angle is like a cutting tool and swing makes it round nosed I would think.

Have fun and take care

Leo Van Der Loo


http://aroundthewoods.com/imgssharp/im000958.avi

Re: Question for Darrell Feltmate

#5

Re: Question for Darrell Feltmate

Allen Neighbors

>Gary, most of mine (like those in the photograph) have pretty well rounded corners, but I have a few that are like this one... just barely rounded on the end, and corners remain fairly sharp. I think it's because I do all my sharpening of Oland cutters on the 1" belt sander.

Allen

Re: Question for Darrell Feltmate

#6

Re:Here are my 3 original Oland......

Allen Neighbors

>Jamie, these are awesome mounts! Did you make these?

Allen

Re: Question for Darrell Feltmate

#7

Re: Question for Darrell Feltmate

GaryG in MD

>Thanks for the link, Leo. It was good to see that sharpening clip.

But that's clearly not the same tool as in my original post. The one above does not have a rounded end. To my eye, it has a straight nose with square corners; that's what I call a bedan. The only question is, is a bedan a subset of Oland tools? Or vice versa? Or neither?

Gary

Re: Question for Darrell Feltmate

#8

Re:Allen-mounts??? I'm not sure...

JamieDonaldson

>... what you mean? This image is of the working ends of my Oland tools, and the manner in which the cutters are mounted is original to the tools.

Re: Question for Darrell Feltmate

#9

Re:Allen-mounts??? I'm not sure...

Gil Jones

>Jamie, I think that MOUNT refers to the Boring Bar Shaft. It is what you MOUNT the cutting bit TO. Anyway, it sounds like that to me.

Gil

Re: Question for Darrell Feltmate

#10

Re:Allen-mounts??? I'm not sure...

Allen Neighbors

>Sorry, Jamie, I didn't make myself clear. Used the wrong phraseology, I guess. Gil's right. The square, tool mounting, holes in the boring bars. That's what I was talking about. I was curious if you made the tools. The way the cutters mount is so professional looking... wish I had the mortising bits to cut that sort of hole.

Allen