Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

morse taper question

Posts

morse taper question

#1

morse taper question

Bruce, a MN Galoot

>I have an old Delta lathe, Dual Duty, maybe dating to the 1930s. I need a drill chuck with a morse taper for the tailstock, and I can find them but I don't know how to tell what taper my tailstock has. How can I find out this info?

Thanks

Bruce

Re: morse taper question

#2

Re: morse taper question *LINK*

Bill Howatt

>Measure the big end and compare with table in link.

Bill


Morse Taper Sizes

Re: morse taper question

#3

Re: morse taper question

Bruce, a MN Galoot

>that's what I was looking for. Thanks, Bill

bh

Re: morse taper question

#4

Re: morse taper question

don in central IL

>Bill, where do you come up with that info? It seems whatever the question, you have a sight that has just the right stuff. My 'favorites' are getting out of hand because of you, and some others here at WC. Thanks and keep 'em coming.

Re: morse taper question

#5

Re: morse taper question

Bill Howatt

>Google is your friend! I just typed morse taper into my Google search and picked a site in the results.

Amazing what you can find on just about anything. What I get a kick out of, and also find it makes things frustrating, is how you can type in some obscure thing and find how many different things come up with that string of characters.

Bill

Re: morse taper question

#6

Re: morse taper question

Merv in BC

>thanks for the link I always wondered if there was such a chart

Re: morse taper question

#7

Re: morse taper question

Ken Oakley- Sunny St. Cloud, Fla.

>If it is a Delta and you have a model number or serial number chances are Delta can provide the info you need if you contact them. I have done it in the past and they have always provided what I was looking for, free. Sometimes they can even tell you the date of manufacture. I have never gone back past the 1940's but they say they have records on most equipment they manufactured.

Re: morse taper question

#8

Re: morse taper question

Bruce, a MN Galoot

>Thanks, Ken, I'll give that a try. I'm pretty sure this one dates back to the 30's, if not earlier. It's not a particularly robust lathe, but it serves most of my needs. I bought it from my grandmother in 1963 for the princely sum of $10.

Bruce