Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Adding a flywheel and treadle to a Jet Mini?

Posts

Adding a flywheel and treadle to a Jet Mini?

#1

Adding a flywheel and treadle to a Jet Mini?

GuyO

>Has anyone ever added a treadle to a Jet Mini so they can do turnings at fairs and demos where there isn't a AC power source - I thougtht perhaps a member of this august group had already done the engineering -- It seems that with the open frame and ready access to the pulleys that mounting a flywheel and treadle directly below it would be almost trivial. In a pinch I can almost see using a old sewing machine base --

Comments? Jeers?

Re: Adding a flywheel and treadle to a Jet Mini?

#2

How about...

Jorge Castaneda

>a Singer sawing machine stand, one of the old ones, and all you have to do is take out the handwheel of the lathe and replace it with the appropiate pulley and some drillind and bolts to fasten the lathe to the stand, and fashion a belt of the proper lenght.

Voila!

Just an idea, it may work, good luck

Jorge