Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

First Carving Attempt:

Posts

First Carving Attempt:

#1

First Carving Attempt:

David Hammond, in Powder Springs GA

>Hey guys,

I've wanted to try carving on a turned piece of wood for some time, and I finally bought a veiner from WoodCraft. This is a 16" dia piece of Elm that seemed perfect for what I wanted to try. I kind of wish it had been maple or some such cooperative wood, but I like the finish product: what do ya'll think?

David


img

Re: First Carving Attempt:

#2

Re: First Carving Attempt:

Carole Valentine

>David, I think it looks great! Simple carving that does not overpower the beauty of the wood - and it IS some pretty wood. Nice work!

Re: First Carving Attempt:

#3

JL

Re: Looks good from here...

JL

>did you use an indexer or what? Also, why did you go for an odd number of larger channels? (Just curious).

Re: First Carving Attempt:

#4

good job dave

john lucas

>

Re: First Carving Attempt:

#5

Re: First Carving Attempt:

Allen Neighbors

>Looks pretty nice! I like the whole thing. As far as carving is concerned... looks like you're off to a pretty good start!

Allen

Re: First Carving Attempt:

#6

Re: First Carving Attempt:

George Van

>Nice simple pattern Dave. A great start!

Re: First Carving Attempt:

#7

Re: First Carving Attempt:

David Hammond, in Powder Springs GA

>Thanks everybody, the platter has gotten good reactions around my house too, so we'll see what the general public thinks in November, when it wil be in my first art show.

JL: I chose odd, just so it wouldn't be even - no real reason in other words, I just thought it would look better. And no, I didn't use my indexer, I just divided it off into five even spaces, carved the deeper grooves first, then just marked the little grooves by eye, and used the tool rest on the lathe as a straight line, to keep my angle correct.

Thanks again everybody,

David

Re: First Carving Attempt:

#8

Re: Good first carving attempt, but ...

Jamie Donaldson

>....it can cause you to buy a bunch of new tools! Dremels, Foredoms, Flexcuts, all sorts of goodies. And Elm can be a little "chippie" as you may have discovered.