Persimon ??
Terry Quiram, Roanoke Illinois
>Anyone ever turn Persimon? I guess this is a drive by gloat. I am picking up a 16" diameter log tomorrow. My tree service friend says the bark looks wrinkly or funny. I can hardly wait.
Terry
Knowledge You Can Build On — Est. 1998
Persimon ??
Terry Quiram, Roanoke Illinois
>Anyone ever turn Persimon? I guess this is a drive by gloat. I am picking up a 16" diameter log tomorrow. My tree service friend says the bark looks wrinkly or funny. I can hardly wait.
Terry
Re: Persimon ??
Raymond Overman in SC
>I've turned a little bit. It was hard as a rock of course but didn't have much figure. It was a pretty young tree though and I only had a small length of it. I've seen other people's turnings with it that has a lot of character.
Well worth collecting it though.
Re: Persimon ??
Jim Pugh, Elyria, OH
>Persimmon is also called American Ebony and was used for years to make the club heads for golf woods. From what I read it is only the heart that is likely to be dark. Good luck with your find.
Re: Persimon ??
Barbara Gill, Remlik VA
>Most of the persimmon I have sawn has been light cream yellow with black spots through the wood. Some trees have more black than others. I have a small one down in the yard I need to check out.
Re: Persimon ??
Gary in Zirconia, NC
>Very bland grain so I let it spalt a year and it was great.
Re: Persimon ??
Carole Valentine
>I watched a 4" persimmon completely jam up a huge chipper that can take up to 10" logs the other day. The guy just shook his head and said "I should have known better than to put that darned persimmon in there!"
Re: Persimon ??
Stuart Johnson
>I like the wood. We had one taken down. I cut it to length and sealed the ends very well. When I got around to trying some of it found the bugs had turned a lot of it to mush. The little buggers went through the bark.
You might want to rough turn it as quick as you can.
Re: Persimon cracks very quickly
Bill Turpin in WNC mountains
>Cut up an 8" persimon two years ago. Sliced off three pieces, then started to use Anchorseal. The first piece cracked before I gat it painted. It was a cloudy, drippy day. Within a week there was nothing left but pen blanks!
Bill in WNC mountains
Re: Beautiful, Gary.
Allen Neighbors
>
Re: Persimon cracks very quickly
Allen Neighbors
>Bill, is it worse than cherry?
Re: Persimon cracks very quickly
Hooligan
>Much. If you don't get the pith out of it, you will se dramatic loss in a matter of hours.
One of the primary reasons that persimmon isn't really a commercial timber is that it has such high loss rates. It can be really nice, even grained wood, similar to pecan or hickory, but goes bad so rapidly that you can hardly dry it down.
Re: Persimon ??
Terry Quiram, Roanoke Illinois
>Thanks everyone, I appreciate the info. Gary nice looking vessel.
Terry
Re: Persimon ?? - best wood I've ever turned
Devon Palmer
>Cuts like "Buttah" :) Shrinks badly ACROSS the grain since its a fruitwood. Turns a dingy grey when dry/oxidized. Would be perfect for making hats since it warps so much. I've had marginal luck twice turning as it normally doesn't survive drying thick. Best luck with turning thing, 1/8-1/14, then bleaching.
- Devon
I don't understand
Jorge Castaneda
>All this talk about how persimmon cracks and distorts, how then it got to be the standard in the textile industry for spools, spindles & shutles?
Inquiring mind needs to know.
Jorge
I think you are mistaken, *LINK*
Leo Van Der Loo
>Hi Jorge
Jorge all the old textile shuttles that I know of and I have one myself, hanging on the wall as an art piece, where made from dogwood.
Lee Valley has still some dogwood shuttle blocks for sale, If I recall right they bought a warehouse full of this wood, I think in europe (France?)
The reason that the wood was sold, I think was that the shuttles are now made somewhere else or other material used, I'm not sure about that.
Have fun and take care
Leo Van Der Loo
http://www.leevalley.com/wood/page.aspx?c=1&p=43230&cat=1,250,43217
Re: I think you are mistaken,
Jorge Castaneda
>Leo,
I am familiar with the dogwood LV sells, I've turned it a bit, but around 30 years ago, I was in Charleston SC and at a flea market picked up a spool, a shuttle and several spindles, wood creamy, to orange, to dark brown, hard and heavy, I was told it is persimmon, same wood used for golf clubs; I'll try to unearth them, and show you pictures, have not seen them in a while. Now they use metal and plastics.
Jorge
Re: I think you are mistaken,
Leo Van Der Loo
>Hi Jorge
Jorge it is quite possible that some shuttles where made from Persimon, it is after all also a impact resistant wood, I know beech has also been used, but the majority of shuttles where made from Dogwood to the best of my knowledge.
But he, those Persimon ones must have looked real pretty compared to the dogwood ones.
Have fun and take care
Leo Van Der Loo
Re: Persimon ??
Jim
>Terry, I wish we lived a bit closer, I'd take as much Persimmon as you would give me.
Here's a piece that I turned from what was essentially a cast off:
Gloat warning....
Jim
>And there's a story behind this piece. You'll notice as folks say, it splits pretty badly. There are no less than 8 cracks in this piece...
I was in Atlanta last year when Dale Nish and Nick Cook were doing their demo's at Redmond and Son machinery. All eleven clubs in Georgia were represented, so there were quite a few folks there. We had a good time watching Nick and Dale take their usual digs at each other about scrapers and such...
When they were finished, a raffle was held, and I hoped (vainly) that I might win one of their turnings. Well not only did I not win any turnings, by the time one of my five numbers was called, there were only 4 or 5 pieces of the two pallets of wood left. I looked at this Persimmon and saw all the spalting and cracks, and then was looking at a larger piece of Sweet Gum. It was sound, but much too large for my lathe. I nearly picked up the Sweet Gum thinking I could cut it up into smaller pieces, when another turner put the Persimmon down in disgust, and made off with the Sweet Gum. Thinking I could make pen blanks out of the Persimmon I took it home where it sat for a year. Luckily I didn't have any pen turning equipment at the time...
One day I wanted to turn something from start to finish and needed a blank that was totally seasoned. I looked around the shop (which as usual was a mess) when I spied this piece of Persimmon perched on top of a pile. I mused over it and conviction hit me like flash. "Why not? Why the HECK not?" With enthusiasm that is unusual even for me, I chucked that dude up and went to work. It took several applications of CA glue but there was no way I was giving up on it even though it was hard as a rock! And here you see the result.
Does anyone think I shoulda made pen blanks out of it?
And for all of you that attended that demo, and passed up this piece of wood? (I know you folks are out there, I recognize the names!) And I mean this in the nicest possible way:
Eat your heart out! :-D
Re: Gloat warning....
Allen Neighbors
>That really is some pretty wood. Heck, I even like the fruit, too!
Nice save. :o)
Allen