Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Black Ash with Brass

Posts

Black Ash with Brass

#1

Leo Van Der Loo

Black Ash with Brass

Leo Van Der Loo

>There was a thread about filling voids, and as an example I put up a pic. of an small bowl that I made from black ash with some spalted heardwood and some small voids, which I filled with brass shavings and CA glue.

I'll put up the profile of that bowl and the other picture up here to.

Have fun and take care

Leo Van Der Loo


img

Re: Black Ash with Brass

#2

Leo Van Der Loo

Re: Black Ash with Brass 

Leo Van Der Loo

>


img

Re: Black Ash with Brass

#3

Re: Black Ash with Brass

George Van

>Nice form Leo, I like the way you continued that nice curve right out to the natural edge.

Re: Black Ash with Brass

#4

Leo Van Der Loo

Thank you GEORGE

Leo Van Der Loo

>

Re: Black Ash with Brass

#5

Re: Black Ash with Brass

Allen Neighbors

>Nice NE Bowl, Leo. I like the brass filings, but it seems that I always put it in the wrong wood. I'd like to make it really glisten like shiny gold, and never can get it to do that.

Really nice work!

Allen

Re: Black Ash with Brass

#6

Leo Van Der Loo

Re: Black Ash with Brass

Leo Van Der Loo

>Hi Allan, thank you.

Next time try this, pack the brass splinters as tight as you can, then use the thin CA and slowly fill right to the top, (if you think the wood will absorb to much, seal the wood beforehand) now sand it, after that take a cabinet scraper or whatever you have, and very carefully take a wisp off the brass, that's the best you're gonna get, now wax or lacker over that, to minimize the oxidation.

It will never look like solid metal but you can get close with fine metal powders, like copper or brass, but you know what happens after you shine your copper or brass ware up, same happens with that surface in your bowl.

Have fun and take care

Leo Van Der Loo