Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Rolly Munro Mini Hollower -- SWEEEET!

Posts

Rolly Munro Mini Hollower -- SWEEEET!

#1

Rolly Munro Mini Hollower -- SWEEEET!

Ed Moore

>After several strange twists, I ordered the Mini Hollower from Binh Pho and received it promptly. My initial reaction was surprise at how small the cutters are. I just measured them and they are 9/32". Well they were plenty aggressive and I set the cover so the shaving would be thinner.

My first use of the Munro hollower was hollowing the interior of a small cherry goblet and it went well. Since there is a learning curve for the Munro, I chose to clean up the cuts with a curved scraper, but it was clear that with some practice that might not be necessary. This was also my first goblet and I didn't want to blow it. Thank you Jimmy Clewes DVD's. It would not have occurred to me to use a 1/4" bowl gouge (standard grind) for the exterior and the stem had I not seen it on Jimmy's DVD.

My conclusion is that the excellent reputation of the Munro hollowers is well-deserved. I am looking forward to trying it on small boxes.

Observation: In Jimmy's DVD where he turns an end-grain vase, he introduces a variety of hollowers. Now his name is on a Hamlet combo set. But in the DVD it is clear that he does most of the hollowing with a Munro. Hmmmm!

Ed

Re: Rolly Munro Mini Hollower -- SWEEEET!

#2

Re: Rolly Munro Mini Hollower -- SWEEEET!

David Galloway

>Well, you did it to me. I was on the fence but I had talked to Binh about the tools. I just needed a nudge and you were it. I would love to hear more from you as you learn the tool. I should get mine by the first of next week!

David

Re: Rolly Munro Mini Hollower -- SWEEEET!

#3

Re: Rolly Munro Mini Hollower -- SWEEEET!

Hooligan

>I've been fighting the urge to go that route. I am up in the air between the Munro, and the Stinger from Pencil.

Re: Rolly Munro Mini Hollower -- SWEEEET!

#4

Cherry goblet

Ed Moore

>This cherry goblet was the one I referred to when using the Munro Mini.

7 7/8" high

2 1/4" dia cup

2 1/8" dia base

stem tapers from 5/32" to 13/64"

The cup is 1/16" thick.

Comments/criticism welcome.

Ed


img

Re: Rolly Munro Mini Hollower -- SWEEEET!

#5

Re: Rolly Munro Mini Hollower -- SWEEEET!

Hooligan

>Actually, have you got a source for pictures of the Mini? And what it contains? That is of interest to me, I was assuming that it would be just like the standard, but smaller....

Re: Rolly Munro Mini Hollower -- SWEEEET!

#6

Re: Cherry goblet

Allen Neighbors

>The old gray guy likes it! Nice work.

Allen

Re: Rolly Munro Mini Hollower -- SWEEEET!

#7

Carroll's Woodcraft (AU) *LINK*

Ed Moore

>Hooligan,

Check out the URL below for Carroll's. The picture is there. The prices are Aussie, so don't panic.

It comes with a cutter and two extra. It includes the sharpening jig for the 8 mm cutters and a tool with three Allen wrenches. It also has a little piece of clear plastic which is used to set the cover for the tool - be careful or you will miss it.

Order from BINH PHO.

Ed


Carroll's Woodcraft

Re: Rolly Munro Mini Hollower -- SWEEEET!

#8

Re: Cherry goblet

Mark Wollschlager

>Nice looking work Ed.

Did you use a string steady or just take it slow and easy?

Mark.

Re: Rolly Munro Mini Hollower -- SWEEEET!

#9

Re: Carroll's Woodcraft (AU)

Gil Jones

>235 Australian Dollar = 176.584 US Dollar (at todays rate)

Re: Rolly Munro Mini Hollower -- SWEEEET!

#10

Re: Cherry goblet

Ed Moore

>Hi Mark,

Have you been keeping the Stubby busy? I have the supports under the shop and am preparing for an ornament demo on the 28th.

I stuffed some paper towel in the cup and brought the tailcenter up to reduce the wobble. By using the 1/4" bowl gouge on short sections it worked pretty well.

Ed

Re: Rolly Munro Mini Hollower -- SWEEEET!

#11

Re: Carroll's Woodcraft (AU)

Hooligan

>So, its just the straight tool? :( I understand that its an articulated head, but I that leaves you short on a high shoulder. Hrumph.

Re: Rolly Munro Mini Hollower -- SWEEEET!

#12

Mini hollower picture

Ed Moore

>Hooligan,

Here is a picture that I just took of mine. The focus isn't perfect, but it should answer your question/concern.

The picture shows the Allen wrench tool, a spare cutter and the sharpener, and the tool. There is some articulation, but it lacks the arms we see on it's larger cousin. I do not know if any small arms are available, but I don't recall seeing any mentioned.

Ed


img

Re: Rolly Munro Mini Hollower -- SWEEEET!

#13

Re: Cherry goblet

Mark Wollschlager

>Stubby has been nice and busy.

The Jet mini is jealous.

Ornament turning on the Robust, that ought to be fun ;-).

mark.

Re: Rolly Munro Mini Hollower -- SWEEEET!

#14

Nice Ed

Ron in Drums PA

>

Re: Rolly Munro Mini Hollower -- SWEEEET!

#15

Re: Cherry goblet

Jim Shaver Oakville, Ont.

>Hi Ed,

That looks beautiful, I bet it's light enough to float away...

Wonderful!

Take care,

Jim