Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Apple graft burl Hollow form + brass wire

Posts

Apple graft burl Hollow form + brass wire

#1

Leo Van Der Loo

Apple graft burl Hollow form + brass wire

Leo Van Der Loo

>Well this Appletree graft burl had already some splits in it when a friend of mine gave it to me, he said "I forgot all about this one", apparently had been sitting for a month or two already.

Anyway I still turned it and it just split all over, as you can see, it moved a lot while I was turning it, and had to use a hose clamp to keep the top neck together, wasn't able to get a even wall thickness as the wood just moved to much and to quick.

It's an attention-getter now I think, it was a bunch of work trying to get it a smooth finish after it had dried, but apple wood is a nice finishing wood, that helps.

Have fun and take care

Leo Van Der Loo


img

Re: Apple graft burl Hollow form + brass wire

#2

Leo Van Der Loo

Re: Apple graft burl Hollow form + brass wire 

Leo Van Der Loo

>


img

Re: Apple graft burl Hollow form + brass wire

#3

Leo Van Der Loo

Re: Apple graft burl Hollow form + brass wire 

Leo Van Der Loo

>


img

Re: Apple graft burl Hollow form + brass wire

#4

Re: Apple graft burl Hollow form + brass wire

George Van

>This certainly is an eyecatcher Leo. Your next one will undoubtably be a lot easier!

Re: Apple graft burl Hollow form + brass wire

#5

Brad Vietje

Great job, Leo -- I really like it.

Brad Vietje

>Nice save, Leo,

I make quite a few end grain hollow forms, sometimes turned right on the pith, so it can be fun getting them thin enough that they don't split, especially through the bottom, where thre pith goes through the foot. Your piece is so intriguing and interesting that I might just TRY to get cracks, possibly by wrapping with wire or a collar of some sort, maybe at both ends, and leaving the walls a little thicker in the first turning. then maybe I'd re-mount and finish turn to round after the movement and splitting... who knows, time to play !

The more I think about your piece, the more I like it. I also wonder if the graft interface caused it to split more than usual -- which is a lot with Apple.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Apple graft burl Hollow form + brass wire

#6

Leo Van Der Loo

Re: Apple graft burl Hollow form + brass wire

Leo Van Der Loo

>Heck no George, you should'a seen the apple burl LOML and my sister brought home for me to turn, Ha I had it already next to the fire, but then I can't help myself, just stuck it on the lathe, you know just to see the inside, (grin)

I did finish it, took nearly half a bottle of CA, and it is now another attention grabber, (Bigger grin) no HF though.

Thanks for your comments George

Have fun and take care

Leo Van Der Loo

Re: Apple graft burl Hollow form + brass wire

#7

Leo Van Der Loo

Re: Great job, Leo -- I really like it.

Leo Van Der Loo

>Hi Brad, thank you.

Yes I think it being a graft made it twist and deform more, I'm quite sure that having some splits in it already before even starting also contributed to it and commercial apple growing trees do more twisting and splitting in my experience, the wild grown apple is a lot less troublesome in that regard.