Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

simple, cheap lathe

Posts

simple, cheap lathe

#1

simple, cheap lathe

victor

>hello

can anyone tell me where i can buy a lathe that is powered by a handdrill, i can't find any info on the internet maybe it has a special name?. i need one only for making chisel handles.

Re: simple, cheap lathe

#2

Re: simple, cheap lathe

Joe Herrmann

>There was one out that mounted to your drill press on the market sometime back. I think it was called a "Vert-i-lathe"

Joe

Re: simple, cheap lathe

#3

Re: simple, cheap lathe

thad

>I've seen several up on eBay from time to time.

Re: simple, cheap lathe

#4

Re: simple, cheap lathe *LINK*

Ralph

>Grizzly sells one http://www.grizzly.com/products/h2669

But I think you would be better off spending an extra $100 and getting a mini-lathe


The lathe

Re: simple, cheap lathe

#5

Re: simple, cheap lathe

Bobby Wisdom

>I'm sure a hobby woodturner would make a few chisel handles for a minimum price. They are quick and relatively easy. You might ask at your local woodworking store for a reference. It should save you a few bucks if you really aren't interested in turning.

Re: simple, cheap lathe

#6

Re: simple, cheap lathe

john lucas

>My first lathe was an electric drill. I simply mounted it handle up on a board. I put a screw in the chuck to drive the wood. Then I made a tailstock by making a L shaped bracket that I clamped to the workbench and put a lag screw threw it that I had sharpened to a roughly 60 degree point. For a tool rest another L shaped piece of wood with the top edge planed to an angle, was clamped to the bench. I did this specifially to turn cabinet knobs and tool handles.