Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Take a deep breath, ...

Posts

Take a deep breath, ...

#1

Take a deep breath, ...

Ed Moore

>slooooowww doowwwwnnn, and relax. Here and on other sites far too many of the current posts are rants and thinly disquised vents that make one wonder if the moon is full or there's a tsunami about to hit. Why is all this vitriol coming out of the woodwork now?

1. Fact. There are several forums with different emphases and flavors and one is sponsored by the AAW.

One the AAW site there are people who seem to live or die according to when their copy of the AAW Journal arrives by mail. And they act as if life on this planet should cease if newsstand copies are available prior to their copy arriving. To those people I say "GET A LIFE!!"

On WoW there are those who just have to make their smarmy political comments. It's a privately owned site, so the owner sets the standard his way. Take it or leave it.

2. Fact. No organization is perfect.

The AAW is growing and has the usual accompanying growing pains. We need to vote for good directors so that cliques with questionable agendas and ethics don't ruin it. I know SOME of the past and current directors and they are among the finest folks I know.

Elitism is in the eye of the beholder. And as long as there are people there will be fads and fashion. While I understand that when a viewpoint different from mine is prevalent I might not like it, I do not see why the entire organization must be condemned when this occurs. There is a current trend to emphasize surface decoration and carving. But the works of Bill Luce, Bert Marsh, and many others who seem to make exquisitely shaped bowls are still in vogue and are greatly appreciated. There is no discernible honor in taking potshots at the AAW just because we don't like the current fads.

So, take a deep breath, exhale, and be thankful for the problems that we don't have. Then, do something for someone else today.

Ed

Re: Take a deep breath, ...

#2

Re: Take a deep breath, ... *LINK*

Darrell

>Ed

I thought wood turning was supposed to relax us? What am I missing here? Byt the way, this is an agreement not an argument in case anyone is reading this wrongly.


Around the Woods

Re: Take a deep breath, ...

#3

Steven Antonucci

I love it when someone outlines the issues :-)

steve antonucci

>No doubt that the world stops turning for a second if the AAW magazine is late- I might get to "plagiarize" someone after you :-)

As far as people voicing their opinions about content on the various sites, I think it is important to voice dissent when you don't agree with "the popular crowd." Remember this from school: "If no on has any questions, we'll move on..." There was always one kids getting lost who didn't have the guts to put his hand up for fear of looking stupid, and a bunch of others who probably should have. I don't think that an opposite viewpoint is complaining, but it should be viewed as constructive.

I wouldn't want to have this forum (or any other forum that I belong to) have members censor other members, or member censor themselves becuase they felt their opinions weren't warranted. If people don't like the way the AAW is today, talking about it is a great first step to fixing the problem.

Back in my days in IT, I had a saying for "one off" logins- "Create a group." No matter how bizarre the need was for that one person, I created a group and put one person in it. As soon as that person got what they needed, the other ten came out of the woodwork. Every time one of us says/feels/believes something about a topic, there are 10 more in waiting...

Steve

Re: Take a deep breath, ...

#4

Re: Take a deep breath, ...

Ron in Drums PA

>Well said Ed!

I did leave WOW because of the silly one sidedness.

If your views didn't fit, you get censored.

After I removed myself and my work from WOW, word got back to me that Herm kicked me off.

Re: Take a deep breath, ...

#5

Silence is golden

Ed Moore

>Steve,

One certainly has the right to dissent, but sometimes the best approach is to "choose one's moments" and do battle at a different time on a different platform. Sometimes we need to ask a simple question, "Is this going to accomplish my objective?". Being overly task-oriented, I tend to start to tune out those who are too strident too often and don't know when not to speak. The point was made, so move on.

There was a U.S. Marine Major who was severely wounded. He is now a motivational speaker with a wonderful credo with the acronym "FIDO". Forget It, Move On. Rather than focus on his wounds he deals with the next step.

As a former mathematics professor, I was aware of a review written of a paper that was of questionable value. I have always admired this choice of words. Simply put, it said something like "This paper fills a much-needed void." Sometimes we need to NOT hear the rant and vitriol. Ah, blessed silence.

Ed

Re: Take a deep breath, ...

#6

Re: Amen to you Ed!!! There is a huge ....

Jamie Donaldson

>....difference between constructive criticism and shouting from a personal soapbox.

Re: Take a deep breath, ...

#7

Re: Silence is golden

Jim Shaver Oakville, Ont.

>Hi Ed,

I agree, timing is everything......

:-)

Take care,

Jim

Re: Take a deep breath, ...

#8

Steven Antonucci

but censorship is censorship.

steve antonucci

>Why is some criticism constructive and other criticism not? Oh yeah, because Herm said so. Criticize Herm, get kicked off. I know, private site, blah blah blah... who cares?

I'm with Ron. There we go-taking sides again. And guess what? 10 guys behind me...

Steve

Re: Take a deep breath, ...

#9

Re: Take a deep breath, ...

John Lucas

>I'm going to censor myself. I had a long day and was tired and spoke without thinking. This should be a fun site where people go to learn not a political forum. Besides, even on a soapbox I'm still short.

Re: Take a deep breath, ...

#10

Re: Well Steve, I was making .....

Jamie Donaldson

>....a general statement, but if the shoe fits....! There are discussions, and then there are shouting contests, which achieve very little other than hard feelings and elevated blood pressure.

Re: Take a deep breath, ...

#11

I live in Tobacco Country.....

Barry Irby

>Tobacco is and has been big business in VA and NC. Phillip Morris has major facilities right up the road and has been THE employer in the area for a long time. Locally, everyone knows who Uncle Phil is.

I go to a restaurant and they ask "Smoking or Non-Smoking", I answer, Non-smoking if you have it, but First Available will be fine. They say, we only have Smoking, will that be OK? I ask, "You are going to MAKE me smoke are you?" They laugh and seat us. I am beginning to hear others ask if they are required to smoke.

My point is, I am willing to ignore the smokers and to some degree the defamers and flamers and political ranters, and wood burners, and embellishers, and carvers, and segmenters, and all the others that do things I'm not interested in on these sites and those who say things I don't care to hear and those who hold themselves out to be Holier than Moi, because the overall experience is worth it and the ambiance here is generally great. I learn what I can from those doing things I am not interested in, because someday that bug might bite me and the rest I ignore. You can't make me turn a segmented vessel, or a pen, but I know where to get help if I need it.

Build it and they will come? Ignore them and they will fade away.

Re: Take a deep breath, ...

#12

Re: Amen to you Ed!!! There is a huge ....

Ron in Drums PA

>Jamie Said "....difference between constructive criticism and shouting from a personal soapbox. "

The difference between constructive criticism and shouting form a personal soapbox is if you agree or disagree with what is being said.

Re: Take a deep breath, ...

#13

Re: Take a deep breath, ...

Bill Hale / Woodspinner

>With all of the above commemts etc. in mind I have but one comment.

God bless America and our right to all of our own feelings and the ability to say them here,

Bill in Casa Grande, AZ.

Re: Take a deep breath, ...

#14

Re: Take a deep breath, ...

Mark Mandell - Gone Round In Jersey

>Ed,

Internet "fora" are the perfect places for the "kids who never spoke up in class" to attempt to have the last word. The ability to hide behind "screen names" or handles just exacerbates the practice. This phenomenon is helped along by the perception of power in the mistaken belief that whatever pearls we may post will instantly flash to the far corners of the Earth, there to inspire epiphanies in other previously repressed spirits. There is little so self-affirming as seeing yourself in print, especially when you're able to attract a group of like-minded afficienados. People therefore tend to take themselves far more seriously than others do.

There are also, sadly, lots of folks out there who have nothing better to do than get others torqued up over a strawman. Then, with a cry of "I'll not allow such ***** to go unchallenged," others charge off into the frey on their trusty steeds of Light and Truth to do battle for everyone else who they perceive to be unable to fend for themselves and to Protect the Innocents from the Forces of Darkness and Chaos.

Moderated forums have arisen because of the actual thinness of the gloss we humans call "civilized behavior." Moderating a forum is, and will always be, one form of censorship. It's directly proportional to the need, much like traffic tickets. Go 5 mph over, you'll get a slap-on-the-wrist fine. Drive drunk or reckless or endanger others, you loose your driving privileges. Perhaps the problem arises from the fact that the moderator is cop AND judge, and there's no right too appeal to higher authority.

Basic problem I think, is way too many people think this stuff is actually important enough to get angry over. But with participants ranging from laid-back Stoners to OCD types who insist that their world be ordered down to the orientation and spacing of items in their underwear drawer, it's just not realistic to expect peace-in-the-house at all times.

mm

Re: Take a deep breath, ...

#15

Steven Antonucci

Rather than voice a dissenting opinion...

steve antonucci

>you'd shut up? I think that gets you into more trouble in the long run...

When you carefully pick your battles and people view you as a "troublemaker", that's a problem. People being kicked off of WoW haven't started "frivilous" arguments over art vs. craft or turning vs. carving. My personal soapbox was "miscasting 1.3 Billion Muslims as the cause of all of the world's problems", and argument well worthing entering IMNSHO. Not sure what got Ron kicked off, since I was banned before that, but I'd bet it's equally as worthy.

Lead, follow, or get out of the way. Silence is not golden. It's apathy.

Steve

Re: Take a deep breath, ...

#16

Steven Antonucci

In my house, when the kids fight...

steve antonucci

>they both get punished for fighting. Doesn't matter who started it or why, they were both fighting.

Moderators should use the same logic. If a thread gets out of hand strike the thread (behavior), not the individuals. That way, you don't appear to be taking sides in an attempt to restore order.

Steve

In ten minutes, someone in China will be applauding me :-)

Re: Take a deep breath, ...

#17

censored by me

Ron in Drums PA

>

Re: Take a deep breath, ...

#18

Re: Take a deep breath, ...

Bruce Wiseman

>Well this is a very complex issue. Our country is founded on English law which has the tenent: "in silence there is consent." BUT I was raised that it is not enough to just dissent. You must clearly identify your reason for dissent and pose a solution to the problem. IMHO, when you just complain you maybe ranting. If you offer alternatives to the issue at hand you are being constructive. That being said, I believe it was Jefferson who said: "I may not believe in what you are saying but I will defend to my death your right to say it." (Just my $0.02 which won't even pay the tax at Starbuck.)

Re: Take a deep breath, ...

#19

If you agree with me..

Stuart Johnson

>it is having a discussion. If you disagree you are a left wing rable rousing, shouting conservative. I know this for fact because my god said so.

Re: Take a deep breath, ...

#20

Re: Take a deep breath, ...

Dinyar Chavda

>Thank you, Ed.

I had come across a couple of quotes that might apply here:

I can win an argument on any topic, against any opponent. People know this, and steer clear of me at parties. Often, as a sign of their great respect, they don't even invite me.

- Dave Barry

People demand freedom of speech as a compensation for the freedom of thought which they seldom use.

- Soren Kierkegaard

And now, I am going to try to discipline myself to "Forget it, Move on". Wish it were as easy as it sounds.

Re: Take a deep breath, ...

#21

Sesame Street - Another long post

Raymond Overman in SC

>Which one of these is not like the other one? Which one of these just doesn't belong?

Internet forums since the days of usenet newsgroups are notorious for giving newcomers a perception of some hidden agenda and behind the scenes goings on. I visit six different turning forums frequently. I live and work around computers so I don't miss many days. Each of the forums has a different feel even though there are many cross-overs like me that jump from one forum to the next.

Personally I think Ellis and WC do an excellent job with this forum and I enjoy the discussions that come out of it. Especially the heated ones that involve the art/craft, natural/embellishment, over the roll/under the roll type arguements. They help me develop my ideas and help me answer the question, "What do you use that for." I like the fact that it regularly sponsors contests (which one day I'll get up the nerve to participate in), has a chat group that meets regularly, has participants willing to organize things like the turning exchange and blank exchange, and will support it's members like Carole's Valentines Day surprise. I would like to see more turning pics posted but this forum doesn't lend itself to picture management as easily as WOW or AAW. That's not a criticism and I know that you can post pictures. It's just a statement of how this site is different.

I also frequent SMC and it seems much more relaxed than other forums and welcomes new turners to post pictures more readily. It's not about the nuances of turning the perfect form there. It's about encouragement and comaraderie and just spending some time on the lathe. There's a lot more "picking" at people on that site than on others and I feel that it's because of a relaxed atmosphere and less push to become the next big thing. There are informal challenges or contests and even the new guys are encouraged, no, almost required to try something above their pay grade. They've even taken up collections and have given three Jet mini-lathes with accesories away in the past year just to get flat workers into turning. There are times when I feel like the site doesn't promote design improvements that are being discussed on other sites due to the informal pats on the back for people just standing in front of a lathe and banging something out. Again, it's not a criticism, just the way it is and I think it has it's place.

I view the pictures on the AAW site. I don't post and I rarely read the main forum there. I can't say why I don't participate over there except the layout just doesn't appeal to me and I think other sites do it better.

I read the Yahoo Penturner's group and the Yahoo Turning and Talking group occasionally. Again, the format makes it difficult so I don't frequent them as often as I used to. Pictures are a pain on the Yahoo forums and following a thread is not very easy either. There are much better alternatives but I do get an occasional bit of information that's useful.

I've just started participating on WOW and a lot of the same discussions that are here are there, as many of you know. Because it's more picture-centric it seems that there are a lot of very talented people who post there. Some are traditionalists and some are avant-garde. Many of them have as strong an opinion about woodturning as they do about the rest of their lives and it reflects in the discussions and work shown. I love this about the site because I think it brings on more emotional thought that can be directed back into my work. I'm too new there to make any criticisms but I can say that I think Herman is doing a good job running a site with a lot of different personalities. If you want an open forum for everyone to discuss whatever they want to unfettered, you can easily develop one with no moderation and watch the people come pouring in. Otherwise, you use someone elses forum and abide by their judgement.

Now, that's the six turning sites. I also read another forum occasionally just to get a feel for the eclectic, eccentric, and just plain wierd thoughts of artists. For those of you who think that the six sites above are disfunctional or clique-ish or have problems, try the Craigslist Art forum for a month. Every time I read a days worth of posts over there I see something I like, something I hate, read something disturbing, read something inspiring, read something I don't understand, and generally get a feeling of sitting in a coffee house with a bunch of tattoo'd and pierced people on one side and suit and ties on the other with biases to match. It's a confusing diatribe of individual personalities and agendas with no real binding agent.

Here and on other woodturning sites, even though there are problems, we all have woodturning as the basis for why we are here. Different skill levels, different approaches, and different ideas can come together to help everyone. There is a place for everyone and friends to be made. My approach is to filter out the things that I don't agree with but not discount them as helpful to someone else. The things I disagree with help solidify my convictions and can help me produce better work.

So, in my opinion, every forum is different, everyone's ideas and posts have merit, (even though some of them are wrong) and I will continue to participate so that I have the right to speak my mind every once in a while. If you try to please everyone, you can't please anyone.

Re: Take a deep breath, ...

#22

Steven Antonucci

well said

steve antonucci

>

Re: Take a deep breath, ...

#23

SMC?

Ken Grunke from SW WI

>Well stated, Raymond. I visit several forums on a regular or semi-regular basis and there's something for everyone out there.

Now, I'm trying to figure out what SMC is--something I've missed?

Re: Take a deep breath, ...

#24

FIDO = Forget It, DRIVE On!

Ed Moore

>Sorry, got ahead of myself.

Ed

Re: Take a deep breath, ...

#25

Sawmill Creek Wood Forum

Jim Shaver Oakville, Ont.

>