We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>More or less experimental box this time. Picture (angle of view) makes that finial look taller than it really is. Finial+lid are 2x height of the box.
Box is again some Australian burl and blackwood. 5" diameter and about 5 1/2" high.
What do you think? The finial is mostly the thing I'm concerned, what do you think? Good, bad or "burn it quickly!"?
>Please take my suggestions as just suggestions, I am not an expert on finials and probably could not make one better than yours.
First, is the finial leaning to the left or have I got my head one crooked again?
Second, I think it would look better if the small burl insert in the finial were a replica of the shape of the vessel. The vessel appears to be asymmetrical and the insert appears symmetrical.
Third, I think I would have made the finial slightly more slender by emphasizing the Bells or trumpet shapes slightly more. Less of a straight sided cone and more of a curved flare shape.
The engineer in me (which is the curse of any design sense I might have ever developed) suggests the finial should be shorter. Part of me sees the finial as a handle that you should be able to use to jerk the lid off the box, not as art.
>There is just something that strikes me as almost magical or mysterious about this, with that really bold beautiful burl, and that tall finial. I am not a huge finial fan, but there is something about this combination that really catches me, and I like the burl inserts in the finial - I should hope to do so good some day!
>Beautiful piece! Nice burl. I'm no expert on finials (or much of anything else) but the finial looks to me that it's a bit "heavy". I think it would look better if it were more delicate and slender. Of course, I may have just spent way too much time on Cindy Drozda's website. It's a very nice piece, as is.
>"First, is the finial leaning to the left or have I got my head one crooked again?"
The finial _should not_ lean to left but I don't want to say your head is crooked either...
"Second, I think it would look better if the small burl insert in the finial were a replica of the shape of the vessel. The vessel appears to be asymmetrical and the insert appears symmetrical."
In fact that burl insert is quite close replica of the shape of the vessel. I think that angle of that picture is doing some tricks...
>I just had to chuck that again and modify that lid and finial. This is how it is now. Let's see if I leave that bead/shoulder to the collar, now I think it separates lid from the collar nicely...