Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Powermatic model 90 lathe value

Posts

Powermatic model 90 lathe value

#1

Powermatic model 90 lathe value

Larry Clinton in Frankfort, Indiana

>Hi, I'm usually on the flat side but need some expert advice from some of you turners. I live in Central Indiana and a local school is selling off its woodworking equipment. They have 3 Powermatic lathes, all model 90's. According to the gentleman handling the sale one is in decent condition the other two need some parts or work. As the only lathes I have are one "homemade" I picked up at an auction and two cheap craftsman lathes I haven't even set up yet - (paid $50 for one and $5.00 for one at an auction). My married son is quite interested in turning, and I would like to learn more about the craft. I wondered if the Powermatic is a good choice. The lathes are all 3 phase so I would either have to change the motor or install a VFD or converter.

Questions are 1. Would you recommend purchasing the lathe?

And 2. What is a fair price for this piece of equipment? I told the gentleman I would make an appointment next week to look at the equipment.

They have a 6" jointer; I already have an 8" so wasn't interested in that. The maintenance department is keeping the tablesaw and bandsaw. Not sure if they have anything else for sale - will find out when I look at the lathes.

Re: Powermatic model 90 lathe value

#2

Re: Powermatic model 90 lathe value

TDRice

>I paid $1500 for my model 90, also from a school but in like new condition.

Re: Powermatic model 90 lathe value

#3

Re: Powermatic model 90 lathe value

don in central IL

>A small high school in central Illinois just had a auction and sold a Powermatic Model 45 that was usable but needed a lot of cleaning up. It sold for a little over $200.

Re: Powermatic model 90 lathe value

#4

Re: Powermatic model 90 lathe value

Bill Hale / Woodspinner

>At $ 50.00 ea I would buy all three, fix up the two best with parts from the third. Left over parts could be sold.

This would give you and son each a lathe.

Contact Surplus Center for the inverters.

Bill in Casa Grande, AZ.

Re: Powermatic model 90 lathe value

#5

Re: Powermatic model 90 lathe value

Hooligan

>I think that the model 90 is, and always will be, one of PMs best. There are so many good qualities of that machine that you can't go wrong. They had/have an accessory to add a 4 inch riser block, making them even more useful for faceplate work. As long as the Reeves drive is in good condition, you should have no problems at all.

As far as value goes, I have seen them regularly at $500 plus, and very rarely over $750, which in my mind they are worth every Penny. If I could buy a dozen right, I would, because I know that they would move on their own.

Oh, one last thing, if you DO get one, all I would recommend is about 200 punds ballast on the lower shelf. They are a heavy lathe to begin with, but you can never go wrong with more weight.

Re: Powermatic model 90 lathe value

#6

Re: Thanks for the help.

Larry Clinton in Frankfort, Indiana

>Looks like I will make arrangements to view the machines tommorow or the next day. I will place a bid on the working unit - may put a small bid on the others - Appreciate the information.