Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Getting back to turning

Posts

Getting back to turning

#1

Getting back to turning

john lucas

>Boy I'm ready for some turning. I've been working on building the treadle lathe. It's coming along but I miss using the lathe. I should get to turn in a day or so. I have to make the drive wheel and I plan to do it on the lathe. Will have to build an outboard tool rest to turn 24". I hope to do that tomorrow while I'm gluing up the parts for the wheel.

this isn't a totally traditional treadle lathe. I had a spindle left over from another lathe so I'm using that as the drive spindle. That way I can use faceplates and chucks and #2 morse taper accessories. I'm not sure what I'm going to do about the tailstock yet. I'll probably cut a taper in the wood for now and look at putting in a metal morse taper later on.

Re: Getting back to turning

#2

Re: Getting back to turning

jwoodwright

>John, Just an idea... How about a #3MT to #2MT adaptor for the Tailstock? Using a set of Forstner Bits, should give a good taper, you should have little Filing to get a good fit...

Re: Getting back to turning

#3

Re: Getting back to turning

john lucas

>That's what I'm Leaning toward. I can cut the taper easily, I've made several wooded taper reamers. I have to place an Enco order for some other things that I need so I'll look and see what they have. A morse taper extension might work. I could cut off the rear morse taper and then I would just have a straight shank with #2 morse taper. Now if I just had my double end morse taper that I gave away when I sold my Nova lathe it would be easy to install accurately. guess I'll have to make a wooden one.