Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Ridgid Lathe Spindle Size??

Posts

Ridgid Lathe Spindle Size??

#1

Ridgid Lathe Spindle Size??

Gil Jones

>Does anyone have a 12" (tube way) Ridgid Woodturning Lathe that is 6 or more years old? I need to know the spindle size and tpi please.

Thanks,

Gil

Re: Ridgid Lathe Spindle Size??

#2

Re: Ridgid Lathe Spindle Size??

Robin L

>3/4" 16tpi

Re: Ridgid Lathe Spindle Size??

#3

Re: Ridgid Lathe Spindle Size??

Edward in Vancouver

>Had a peek at a 2nd hand Rigid lathe in garage sale, and it looks suspiciously identical to my vintage 1980's Craftsman lathe, also looking very much like the tube lathe CDN Tire (Mastercraft) sells.

Yup, 3/4"by 16 tpi, morse taper #1. Now getting very hard to find attachments for it. One, and only one bonus for the 16 tpi configertion, you can get very cheap face plates. Just trot off to your local plumbing store. The pipe flanges are the same threading, but are tapered, so you have to chase out the threads a little more. I've got about 4 of the 8" wheels made from 2x8's mounted on these flanges with various grits of sandpaper glued on, poor man's disk sander....

Re: Ridgid Lathe Spindle Size??

#4

Re: Ridgid Lathe Spindle Size??

bernie feinerman

>besides 3/4" and 16tpi it should accept a MT1 assuming it is a copy of the old Craftsman 2 1/4" monotube lathe

Re: Ridgid Lathe Spindle Size??

#5

Re: Ridgid Lathe Spindle Size??

Gil Jones

>Thanks to you all for the fast responces, I will pass the info on to the owner.

Re: Ridgid Lathe Spindle Size??

#6

Re: Ridgid Lathe Spindle Size??

bernie feinerman

>Packard, Penn State, and Grizzley, to name a few, have scroll chucks available with 3/4 by 16 tpi adapters.

Bill Noble, among others, sells inexpensive face plates, etc.

There seem to be plenty of toys to use on the old monotube lathes. Whether one should keep buying accessories for it is another subject.

Re: Ridgid Lathe Spindle Size??

#7

Re: Ridgid Lathe Spindle Size??

Gil Jones

>Thanks, Bernie, 3/4" X 16 tpi was not a problem. The owner told me it was a 3/4" X 12 tpi, and my query was to find out the real size {I have never seen the lathe, and it is 65 miles from me).