Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Meeting Betty Scarpino

Posts

Meeting Betty Scarpino

#1

Barb Siddiqui

Meeting Betty Scarpino

Barb Siddiqui

>I'm new to the world of woodturning, but have read many of the authors and

know a bit from 'book learnin". Today I had a surprise visit from Betty Scarpino,

who happened to be in the area and looked up any local turners through the

AAW listings. I'm so glad the real pros are down-to-earth people and willing to

share with commoners! She was fun to meet, very humble and full of stories.

I know many of you have seen her demonstrations and taken her classes. I

enjoy her new column in Woodworker's Journal, and look forward to many more.

What a great afternoon!

Re: Meeting Betty Scarpino

#2

Re: Meeting Betty Scarpino

Jennifer@Indy.USA

>I knew you'd have a great day!

:)

Re: Meeting Betty Scarpino

#3

Barb Siddiqui

Yup! ;-)

Barb Siddiqui

>

Re: Meeting Betty Scarpino

#4

Re: Yup! ;-)

eliot d

>I can't say I know Betty Scarpino, but I met her when she demonstrated at our club. I think she's just great -- a fine wood turner and, it appears, a wonderful person. I believe it's clear, too, that she is as much a sculptor as she is a wood turner. At our club, some of what she showed was pure sculpture -- no lathe involved. If you follow in her foot steps, you'll be carving and decorating as much as wood turning.

Re: Meeting Betty Scarpino

#5

Barb Siddiqui

Hi eliot d...

Barb Siddiqui

>I was showing her a bowl I admired from Patrick Spielman's Art of the Lathe book, and her first reaction was "Oh! that was a Long time ago..." because she has traveled so far from that, I know. I'm starting out. Bowls it is, until I get past that 'transition area' Russ Fairfield had to

doctor up for me on my first lesson. Practice, practice. Betty made one statement in our discussion that got me to laughing. Discussing some technique, I forget what, and she said,

"you just kind of get into one of those Zen moments." I think it was about final scraping cuts the full height of a bowl without interruption, top to bottom. I laughed and answered, "I'm afraid I'm real short on those Zen moments so far." She was laughing, too, by the way.

Re: Meeting Betty Scarpino

#6

Re: Hi eliot d...

eliot d

>Hi Barb,

It sounds to me that are on your way to those Zen moments. Of course , there is more to turning than technique, but, strange as it may seem, there is a wonderful transcendent feeling to something as apparently mundane as getting just the right kind of shaving from a fine scraping cut made with a burr that you raised on your scraper in just the right way. I can't say I know anything about Zen philosophy, but I suspect that it's worth looking into in conjunction with the draft of fine wood turning.

Re: Meeting Betty Scarpino

#7

Re: Hi eliot d...

eliot d

>I meant to write "craft" of fine wood turning. But I suppose the first few years of turning is like writing a first draft.

Re: Meeting Betty Scarpino

#8

Barb Siddiqui

Hi eliot d...

Barb Siddiqui

>"something as apparently mundane as getting just the right kind of shaving from a fine scraping cut made with a burr that you raised on your scraper in just the right way..."

I don't know that 'mundane' belongs in that sentence! but I know what you mean. A couple of times my sharpened tool has peeled off a semi-long shaving in perfection, and it is hypnotic watching that perfect line advance across the surface. Trouble is, that is where I usually lose it, the minute I feel myself getting hypnotized. Practice, practice, practice.....

Re: Meeting Betty Scarpino

#9

What a great day!

Dave Smith, Longview, WA

>Hi Barb,

I had the opportunity to meet Betty at the End of Pond Picnic several years ago. And now she has had the good fortune to meet you. At least you can't blame any of your bad turning habits on me.

Now imagine having Betty living in your neighborhood and her kid going to the same school as your kid. If I had that luck I might be a little further along in the artsy side of turning. She is a great turner, sculptor, mentor, and all around nice person.

Dave Smith

.

Well, Wally has visited me in Longview, WA.

Re: Meeting Betty Scarpino

#10

Barb Siddiqui

What a great day!

Barb Siddiqui

>You've got that right, Dave. Actually, my turning habits will proably be all my own. You are the one who first put a turning gouge in my hand, but you certainly didn't teach me any bad habits! I still have my little egg cup as my First accomplishment, though it's mostly yours. I love it anyway. Thanks for getting me started; you've mentored more beginning turners than anyone I know. Love ya' for it! -BarbS

Re: Meeting Betty Scarpino

#11

Re: Hi eliot d...

eliot d

>What is it that you lose? You mean the Zen feeling?

Re: Meeting Betty Scarpino

#12

Barb Siddiqui

losing zen

Barb Siddiqui

>Sorry, didn't see this down the thread earlier. I lose the Focus to keep that final smooth cut going steady. I'm aiming for one continuous, perfect cut to eliminate tiny ridges left over. It eludes me, and I want perfection off the tool, if I can get it. I'm probably expecting too much of myself as a beginner. I come from carving, where our gouges burnish the wood and leave fine details we never want to sand away. It's difficult to make that transition to assuming the sandpaper will cure all ills on a turning.

Re: Meeting Betty Scarpino

#13

Re: losing zen

eliot d

>I heard somewhere that some Japanese wood workers strive to sharpen their plane irons to the point that the plane cuts a continuous shaving just by being allowed to slide down the incline under its own weight. You seem to want to be in that camp.

Well, I think you should keep trying. but keep in mind that even the best turners sand after cutting. Even they usually start sanding at around 150 grit and go through the grits up to 600, 800, 1000, even higher, e.g. 2400. It's not the same as spoiling a fine edge in carving or flat work with sanding; you're usually working on a continuous fair curve with no edges. I just watched a demo by Johannes Michaelson (spelling?), who is arguably one of the very best at tool control. He was turning a hat from green cherry and started sanding at 120. But it's a pleasure to sense your passion for excellence.

Re: Meeting Betty Scarpino

#14

Barb Siddiqui

Thanks eliot

Barb Siddiqui

>I have no idea where I'm going with this yet. In woodworking so far, "my reach always exceeds my grasp," but that tends to keep one moving along the course, I guess.