Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Osage orange finish

Posts

Osage orange finish

#1

Osage orange finish

Ed Moore

>I have some nice yellow candlesticks of osage orange. I am curious if others have had any luck retarding the change of color that normally occurs with this wood.

1. Does lacquer with a UV inhibitor work? If so, where does one obtain such a lacquer?

2. Does Minwax Helmsman spar urethane help retain the color?

3. What finish do you like best on osage orange?

Thanks,

Ed

Re: Osage orange finish

#2

Re: Osage orange finish

john lucas

>I like the minwax helmsman spar varnish. Spray it on thin, wipe it off and let it dry. Do this about 3 times and then finish with some wax or buff with the Beal system. It leaves a very natural finish that has some UV protection. I never liked the thick finish you get if you just spray on several layers. Osage will change anyway over 5 to 7 years but it's still a beautiful tan color.

Re: Osage orange finish

#3

Re: Osage orange finish

Carole Valentine

>Can't tell you what to use to keep them from turning - I have a couple of pieces of Osage and Mulberry that I wish WOULD turn that beautiful chocolate! They have hardly changed at all. I don't remember what I used on them since they were early turnings - probably Danish Oil. Maybe as John says, they will change in 5-7 years. They are only about a year old.

Re: Osage orange finish

#4

Re: Osage orange finish

Russell L. Babbitt Jr.

>Krylon makes a UV inhibitor product. You might try that.

Re: Osage orange finish

#5

Re: Osage orange finish

Allen Neighbors

>Ed, I use lacquer, and they'll change to chocolate over time. I speed up the change by placing them under an incandescant lamp that we usually have on during the evening hours.

I've had luck retaining the yellowish color in Mesquite Cambium layer by spraying with the same UV Spray that I used to use on color photographs to keep them from fading. It's been too many years since I had any of it, so I can't remember what it's called. John Lucas or Jamie Donaldson might know. I've got a Mesquite Domino box that I made about 10 or 12 years ago, and sprayed with it, and it is just now beginning to fade out a little. If I had some more of it, I'd spray it again.

Hope this helps.

Allen

Re: Osage orange finish

#6

put them in a sunny window

Tom Sontag - St. Louis

>

Re: Osage orange finish

#7

Re: Many years ago we used ......

Jamie Donaldson

>...a Marshall brand UV Inhibitor lacquer spray which turned out to be more damaging than no coating at all! Archival tests showed that the prints lasted better without a coating that prevented outgassing- the gradual loss of chemical bleach residue trapped in the emulsion. I turn a fair amount of osage and have not found any finish that significantly reduces the gradual oxidation change from yellow to caramel color.

Re: Osage orange finish

#8

Re: Many years ago we used ......

john lucas

>I tried about 5 or 6 different uv type finishes on some color photographs that our university uses to display on outside booths. None worked any better than nothing at all except Spar Varnish. Of course Spar Varnish yellowed the photographs unacceptably. I even tried a couple of Car Waxes. Nothing worked well enough to be worth the effort. I've always wanted to do this test on wood but have never had enough time to pull this one off.

Re: Osage orange finish

#9

They are. ;)

Carole Valentine

>

Re: Osage orange finish

#10

Re: Osage orange finish

TDRice

>I've tried everything I can think of. Nothing has slowed down the process appreciably. On the other hand I have a set of corn boats that I made about from O O about 20 years ago. The constant reoiling they undergo in use has turned them the most beautiful golden brown I have ever seen. It looks somewhat like cocobolo but with more golden highlights.

Re: Osage orange finish

#11

Thanks, I think I will ...

Ed Moore

>put a coat of Seal-A-Cell on and wipe it off and then use Helmsman spar semi-gloss urethane, basically following John's suggestion.

And if I find some Krylon inhibitor in the meantime I might use that. I wonder how Krylon Matte Finish will do over their inhibitor. Then Beall buff.

Ed