Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Tormeck bearing rebuild

Posts

Tormeck bearing rebuild

#1

Tormeck bearing rebuild

Bill Hale / Woodspinner

>Hi all

After a bunch of years my Tormeck bearings ( ? ) are gone.

I have not taken it apart but believe these to be sintered sp. or some friction type of bearing. I want to do a change out.

My question is, has anyone replaced them with sealed ball or roller bearings ?

If so any comments would be appreciated.

Bill in Casa Grande, AZ.

Re: Tormeck bearing rebuild

#2

Re: Tormeck bearing rebuild

john lucas

>Bill Are you sure it's the bearings? I have 4 grinders. The oldest is over 20 years old and I've never changed the bearings.

Re: Tormeck bearing rebuild

#3

Re: Tormeck bearing rebuild

CCollier, Pasadena, Tx

>I parted out a Tormek grinder the other day and the bearings are made of some kind of plastic that fit into a hole with an indexing tab to keep them from rotating in the hole.

Re: Tormeck bearing rebuild

#4

Re: Tormeck bearing rebuild

Bill Hale / Woodspinner

>What do you think about adding real bearings ?

Bill

Re: Tormeck bearing rebuild

#5

Re: Tormeck bearing rebuild

Jim

>dunno about the "real" bearings, but I do know that Ernie Conover told me about the Jet Sharpenign system has bronze bushings instead of the plastic that the Tormek has. Over the years the weight of the wheels and the water getting in will wear out the bearings in the Tormek. The Jet improves on this (supposedly) by using the bronze bushings, and re-directing the water a bit better. Not sure it's worth the price difference tho...

Re: Tormeck bearing rebuild

#6

Re: Tormeck bearing rebuild

Jim Terry

>Bill,

The bearings are replacable from Sharptools for $6.

Go to: http://www.sharptoolsusa.com/tips.php for information

on the bearings. Good luck on the replacement. I enjoy my

Tormek.

Jim