Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

spalted sycamore bowl blanks

Posts

spalted sycamore bowl blanks

#1

spalted sycamore bowl blanks

ben d.

>Just got around to cutting these out today. Cut 2 1/2 years ago painted the ends and stood on end in dry since. Spalting looks good.

Comments on the blanks and what finish to use to keep as near as natural as possible.


img

Re: spalted sycamore bowl blanks

#2

Brad Vietje

Re: spalted sycamore bowl blanks

Brad Vietje

>Beauties, Ben!

I hope these are still firm and sound enough to turn ! I'll bet Russ will have better advice on finishing than I can offer -- seems people who want non-yellowing finish often use Waterlox. I have some, but have not tried it yet. Maybe you can rough out a few shapes and get a sense of how well they cut, and let us know.

Sweet lookin' stuff !

Safe spinning,

Brad Vietje

Newbury, VT

Re: spalted sycamore bowl blanks

#3

Ric Taylor

Re: spalted sycamore bowl blanks

Ric Taylor

>Ben,

Lacquer seems to be one of the least yellowing finishes, although any finish will darken the colors somewhat. My suggestion would be the first couple of coats should be a sealer made up of half lacquer and half lacquer thinner.

Ric

Re: spalted sycamore bowl blanks

#4

Re: spalted sycamore bowl blanks

Bob Fawcett

>You probably have some scraps from where you cut these out. Save them and use them to test whatever finishes you have/try. Might help you decide.

I have used Waterlox. It will darken the wood somewhat. Doesn't yellow it too much, but some.