Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

New Chainsaw works......

Posts

New Chainsaw works......

#1

New Chainsaw works......

Dave Belser

>Time for a gin & tonic and a bath. This morning I finally got to the birch tree on my neighbors back lawn. It blew down about 3 or 4 months ago. It was half dead standing so some of it is pretty punky. I promised myself that I wasn't going to have rough chunks of tree lying around at the end of the day - so 11 hours later its all been reduced to working size.

I got 6 bowl blanks roughed out, the largest is 16". They all have some cracks that needed gluing. When people soak spalted punky wood in 50/50 glue water, when do you do it? I assume I need to wait until after they have dried out. Also can I get away just soaking the soft stuff or do I need to do the whole blank?

The rest of the stuff is smaller blanks for spindle work. I've learned that it's not always worth chasing crotch figure for a bowl or platter, so this time I just cut the figure out and squared it off.

well goodnight.

- Dave


img

Re: New Chainsaw works......

#2

Re: New Chainsaw works......

Lan Brady

>You have enough to keep you busy this weekend!

Re: New Chainsaw works......

#3

If it was .......

W.C. Turner

>me, I wouldn't bother going to the trouble, & expense, of trying to glue the cracked wood. There's too much free, solid, wood around for that.

W.C.

Re: New Chainsaw works......

#4

I kept thinking

Dave Belser

>of the quote "life is too short to turn crappy wood"

This is one of my first attempts to turn spalted wood. The blanks I turned yesterday are rather dramatic and I hope they will be worth the effort. For the rest of the tree, mostly what I did is cut the crotch figure out and square it up for small turning projects. The crotch figure was all solid wood and should make some very nice boxes or hollow forms.

There is still about 12' of main trunk left. It's about 22" dia at the base and appears to be solid. I think there is one large crotch left and some wings at the base.

The biggest problem with the spalting is that it's very uneven because the tree has been lying on the ground during this very wet summer we have had.

- Dave