Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

What would be a good book for design?

Posts

What would be a good book for design?

#1

What would be a good book for design?

John Kyler

>I have most of the books and videos for bowls and general woodturning.

What I would like to find is one for spindle design, theory, history, etc.

I'm finding I have more requests for design and also restoration work.

TIA

John

Re: What would be a good book for design?

#2

JL

Re: What would be a good book for design?

JL

>One nice book is by John Kassay - his Windsor furniture book ("Book of American Windsor Furniture: Styles and Technologies") is a very nice "history" and plans book.

Re: What would be a good book for design?

#3

Victorian Woodturnings and woodwork from Astragal

john lucas

>

Re: What would be a good book for design?

#4

Brad Vietje

Look For Books By Asher Benjamin

Brad Vietje

>I have a real interest in Architectural turning, though I'm just beginning to study it.

A friend who does this professionally strongly recommends books by Asher Benjamin for design and understanding of early American architectural elements and design. These old classic books are still available. I'll try to paste in a little text about him and his books ...

Benjamin, Asher

Benjamin, Asher, 1773�1845, American architect, b. Greenfield, Mass. His Country Builder's Assistant was published in 1797 and The American Builder's Companion, with Daniel Reynard, in 1806. Benjamin designed houses and churches in many New England towns, but his greater influence was through his pattern books, which popularized the details of the late colonial style. His later books, The Rudiments of Architecture (1814) and The Practical House Carpenter (1830), show more Greek design.

That's the best I can do for now...

Safe spinning,

Brad Vietje

Newbury, VT

Re: What would be a good book for design?

#5

Re: What would be a good book for design?

John Kyler

>Thanks to all for the input.

i will be tracking these down.

John

Re: What would be a good book for design?

#6

Re: Look For Books By Asher Benjamin

Tony - Memphis

>I really like his books. I got mine at Dover. They are online now. Lots of good stuff there.

Tony

Re: What would be a good book for design?

#7

Re: What would be a good book for design?

Dave Long

>Have you tried the Woodturning Center in Philadelphia? They have an extensive resource list on all type of design. Albert LeCoff, the director, can give you a lot of guidance

Re: What would be a good book for design?

#8

Re: What would be a good book for design?

Jim

>I ran across a basic book on spindle turning in the local library.

Woodturning for Cabinet Makers, by Michael Dunbar

Here's the link on Amazon:

http://tinyurl.com/noyml

Re: What would be a good book for design?

#9

Re: What would be a good book for design?

John Kyler

>Thanks again, I just snatched one from Half.com after your post.

Looks like another good book.

John

Re: What would be a good book for design?

#10

Re: What would be a good book for design?

John Kyler

>I got this and it is a very good book for what I was looking for.

Again thanks for the info.

John