Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

P&N roughing gouges and parting tool

Posts

P&N roughing gouges and parting tool

#1

P&N roughing gouges and parting tool

Carole Valentine

>Woodcraft is having a closeout sale, then you can get an additional $15 off on any order over $50 by using the coupon code. I did not trust my cheesy roughing gouge so this deal popped up just at the right time for me. I like the idea of a solid round tang that will fit in my Hosaluk and Kelton handles.

Re: P&N roughing gouges and parting tool

#2

Keith Tompkins

Re: P&N roughing gouges and parting tool

Keith Tompkins

>Hi Carole, we use the P&N roughing gouges at the school where I teach, and they are quite good.. Just remember, they are spindle tools only, and the longer handles can put more stress on the tang area. I'm sure you already knew that.

Re: P&N roughing gouges and parting tool

#3

Re: P&N roughing gouges and parting tool

john lucas

>Carole I've looked at the P@N tools and will probably buy the spindle gouge. I do like the roughing gouge but I can't justify it. I've been using a standard 3/4" roughing gouge with skinny tang for close to 12 years and haven't had a single problem. I don't use it for roughing bowls. That's where a bowl gouge shines. I will probably look at the parting tool because someone apparently lifted mine at one of my turning gigs.

Re: P&N roughing gouges and parting tool

#4

Re: P&N roughing gouges and parting tool

Carole Valentine

>Yep, but thanks anyway, Keith. Some folks may not be aware of those points.

Re: P&N roughing gouges and parting tool

#5

Re: P&N roughing gouges and parting tool

Carole Valentine

>Hi Joun,

I figure for $39 (after discounts) I wasn't going to find a better deal on the 1". I use it a roughing gouge lot for bringing cylinders (long grain) into round for hollow forms. The little one I have was part of the very first little Henry Taylor beginner "set" of turning tools I ever owned! LOL It's pretty lightweight.

Re: P&N roughing gouges and parting tool

#6

Re: P&N roughing gouges and parting tool

john lucas

>Carole as a tool junkie I will never talk someone out of buying another tool. That would probably be some sort of sin. I just try to look at my tools and see if I can spend that money more wisely on a different tool. The P@N is an awfully nice rough out gouge no doubt about it.

Re: P&N roughing gouges and parting tool

#7

What coupon code?

Craig Daymon

>Carole,

You mentioned an extra $15 off with the coupon code, but didn't mention the code or where to find it. I like the P&N tools and have been holding off on the roughing gouge for price reasons. (Though, I have been using a "German Spindle Gouge" that I bought from Packard which I like for roughing. I think Rude Olsolnik used that sort of roughing gouge at times.)

-Craig

Re: P&N roughing gouges and parting tool

#8

Re: What coupon code?

Gordon Seto

>Store/Catalog/Inernet Coupon Code: 99101

You may need a physical coupon or print out of Email to use in store.

Gordon

Re: P&N roughing gouges and parting tool

#9

Re: What coupon code?

Carole Valentine

>Graig, I looked all over that site just now and could not find it anywhere, but Windows remembered it - 99101. ;) It was suppose to be good thru the 31st I believe.

Re: P&N roughing gouges and parting tool

#10

Re: P&N roughing gouges and parting tool

Sean Troy

>John, no one lifted the tool. This is what happens when you get old, you just think someone took it. Actually, it's still in your back pocket. LOL Been there done that.

Re: P&N roughing gouges and parting tool

#11

Thanks Carole!

Craig Daymon

>Woodcraft closeouts are nice to check. I picked up a round nose and square nose scraper each 1/2" thick for very reasonable sometime back. The coupon was a big help too this time.

Thanks again,

Craig

Re: P&N roughing gouges and parting tool

#12

Re: P&N roughing gouges and parting tool

Mike Nelson

>sure wish they had the bowl and detail gouge on sale, just ordered them from LeeValley.

Re: P&N roughing gouges and parting tool

#13

Re: P&N roughing gouges and parting tool

Bob Elliott

>Went by our local Woodcraft (near Orlando) only to find lack of evidence that P&N gouges ever existed in their inventory!