Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Band Saw Blade Sharpening Help

Posts

Band Saw Blade Sharpening Help

#1

Band Saw Blade Sharpening Help

Jim Shaver Oakville, Ont.

>Hi,

I think some time ago some one posted a way to hand sharpen a bandsaw blade. I can't seem to find it with Search. I would appreciate comments or a link to that thread.....I dinged all the teeth on my Woodslicer Band and it's not A Good Woodslicer right now.

:-)

Take care,

Jim

Re: Band Saw Blade Sharpening Help

#2

Re: Band Saw Blade Sharpening Help *LINK*

Fred Bearman

>One method that I know of is the one that Steve Russell has written up on his CDs, as well as over on rec.crafts.woodturning, a link to that search is posted below, page down and I believe that his post was on 1/26/2000. Hope this is what you're looking for.

Regards,

Fred Bearman


rec.crafts.woodturning on bandsaw sharpening

Re: Band Saw Blade Sharpening Help

#3

Re: Band Saw Blade Sharpening Help

Mkauder, Phenix City, AL

>Jim,

I first heard about it from Wally.

Here is what I do: Mount a metal cutting disk (two together is better)on your Dremel; mark where you start on the blade, and then JUST TOUCH the spinning disk to the tip of each tooth. The part of the tip you touch, is that part of the point that is facing you when the blade is mounted in the BS, i.e. the point of the largest of the two intersecting radius.

All you need is the barest touch - a spark or two.

You can do it with the blade mounted or not, I like not.

Mark

Re: Band Saw Blade Sharpening Help

#4

Re: Band Saw Blade Sharpening Help 

Russ Fairfield

>


img

Re: Band Saw Blade Sharpening Help

#5

Thanks Russ, Mark and Fred!

Jim Shaver Oakville, Ont.

>Hi Guys!

Thanks a million, you have helped me a great deal!

Don't you just love WC, so many great friends always ready to help!

take care,

Jim

Re: Band Saw Blade Sharpening Help

#6

Re: Band Saw Blade Sharpening Help *LINK*

Brian Hahn in SW Wisconsin

>I posted my method for sharpening band saw blades on the AAW "How-To's, Tips, and Techniques" forum, see link below. The original version of this appeared in several messages on the WC Messages board last August.


Sharpening Band Saw Blades

Re: Band Saw Blade Sharpening Help

#7

Re: Thanks Russ, Mark and Fred!

Mike Brazeau

>Jim - if you have a right angle adapter for your Dremmel I found it made it even easier. I also used a diamond disk I got from the Bit Lady at a show, but Princess Auto and LV also have them. Not as fragile as the small disks. Couldn't believe how good a job it does. You lose a bit of set but still works good.

Mike

Re: Band Saw Blade Sharpening Help

#8

Re: Thanks Russ, Mark and Fred!

Russ Fairfield

>I also use a right angle head for the Dremel tool because it is easier, but I always show others how to do it with the straight Dremel because the angle heads aren't something that is available from the local Dremel dealer anymore.