Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

vicmarc belt source?

Posts

vicmarc belt source?

#1

vicmarc belt source?

phil in NJ

>Hi,

I need a longer belt for a Vicmarc VL100. The stock belt is a 340J3.

Anyone have a source in the Northeast that has perhaps a 42" version?

Thanks!

Phil

Re: vicmarc belt source?

#2

Re: vicmarc belt source?

Gil Jones on Lake Seminole Georgia

>These folks may have a belt.

http://aarubcorubber.com/home.htm

Re: vicmarc belt source?

#3

Re: vicmarc belt source?

Danny Wells

>Try Kaman Industrial Technologies. They have warehouses all over the U.S. They stock Gates belts or at least they used to when I replaced my belts. They are Product No. Series 9171, "J" Section of the Gates Catalog. The part number goes like this: 400J6 where

400 = 40.0 inches, effective length

J = Cross section

6 = Number of ribs

Which you probably already knew, however I think that Gates only makes the 6 rib belt. Buy one belt and cut it length ways and you get two belts with 3 ribs. It worked great for me.

Do a Google for Kaman and you should be able to find a store nearby.

Re: vicmarc belt source?

#4

Re: vicmarc belt source?

Mike Cunningham (Cape May NJ)

>Phil,

Jason manufacturs belts that are used on the Vicmarc. I just purchased one for my VL300. Their outlet here in NJ is

Bayview Bearing in Egg Harbor City, NJ

609-965-3009

Mike

Re: vicmarc belt source?

#5

Re: vicmarc belt source?

phil in NJ

>Thanks all!