Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

power sanding speed

Posts

power sanding speed

#1

power sanding speed

eliot d

>I have heard from several sources that it's best to use slow speeds both for lathe rpm and the rpm of the sanding disk itself. One reason, I've heard, is heat build up, which could cause micro checking ;and it's supposed to be bad for the sanding disk backing. Still, I'm not entirely convinced. I sometimes turn the speed way up and sand with light pressure, and I've not had any problems (that I know of). What's the lowdown on this issue? It would seem that there may be some advantages to faster speeds.

Re: power sanding speed

#2

Ric Taylor

Re: power sanding speed

Ric Taylor

>eliot,

Slow speed is better, for the reasons you mentioned. Heat can cause problems in the wood. Also, if you are using a hook and loop arrangement with your sanding disks, the heat can cause the backing to separate from the disk.

Ric