Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Recomendation on Club Video equipment

Posts

Recomendation on Club Video equipment

#1

Recomendation on Club Video equipment

Mkauder, Phenix City, AL

>Any of you have any good suggestions (or warnings) about video equipment to "blow up" demonstrations at club meetings. I have just about decided that the best display (and easiest to store) is a video projector, but am uncertain about the cameras, video switchers, etc.

Mark

Re: Recomendation on Club Video equipment

#2

Re: Recomendation on Club Video equipment *LINK*

Fred Holder

>Many of the Clubs that I attend meeting at have the mini-cams from Woodchucker Supplies. I've done reviews on two different versions of this little camera. They also have switching gear. Web site is below.


Woodchuckers Minicam page

Re: Recomendation on Club Video equipment

#3

Re: Recomendation on Club Video equipment

Russell L. Babbitt Jr.

>I video the demo's for the Channel Islands Woodturners. I use my own didital 8mm camera and a 19" TV. Sometimes we will also use an overhead mirror. I know another group that uses a projector. They rent theirs as they can be quite expensive. I find the projector needs a dark room to be seen clearly. Even at that the picture is not great. An overhead camera might be nice but then you need to be switching between cameras. A real pain and must be done right to keep your audience happy. I find that using one camera and keeping on the move for the best shot I have a happy audience. We should add another TV for members that sit near the back of our room. We also have a PA system so all those in attendance can hear the deomonstrator. The trick is not the equipment but paying attention to your camera work.

Re: Recomendation on Club Video equipment

#4

Mini Cameras

Jennifer@Indy.USA

>Mark,

The Indy club uses the mini cameras and the little toggle switcher. I'm not sure where they came from? I wasn't involved in purchasing them, but Duane Leach or Al Crandal might chime in here. I think they put that all together for our club. They look just like the ones in the link Fred put up. They also made a nice over head thing for the cameras and microphones to be mounted on. It works pretty good.

Jen

Re: Recomendation on Club Video equipment

#5

Woodchuckers

Jim Shaver Oakville, Ont.

>Hi ,

I know our Golden Horseshoe club uses the cams from Woodchuckers. I also noticed that he had them in all the demo's I saw at the AAW, John sure gets around!

Take care,

Jim

Re: Recomendation on Club Video equipment

#6

Re: Recomendation on Club Video equipment

Gary in Zirconia, NC

>At our club, we use from 2 to 4 cameras. In this photo you can see 3. All clubs can not afford to do this, but we are large. Attendance is usually around 200. Membership is over 300. I think you should do as much as you can. But, as posted above I belive quality is better than quanity.


img

Re: Recomendation on Club Video equipment

#7

Re: Recomendation on Club Video equipment

Gary in Zirconia, NC

>In this photo, you can see 4 monitors. The switch is on top of the second monitor. No, John isn't sleeping!


img

Re: Recomendation on Club Video equipment

#8

Re: Recomendation on Club Video equipment

Gary in Zirconia, NC

>Here is where we record the demo's. The large TV on top is for the audiance, there is another one on the other side of the room as shown it the first photo. The club is Carolina Mountain Woodturners.

Re: Recomendation on Club Video equipment

#9

Re:I upgraded our Lu-vulle chapter system.....

JamieDonaldson

>...last year with the Woodchucker's system and the quality is much improved over the old Radio Shack surveillance set we had been using for years. Of course the price was different as well, but the key to the whole process is attentive camera operators who know where to point and switch the cameras at the right time.

Re: Recomendation on Club Video equipment

#10

Re: Recomendation on Club Video equipment

Mike Brazeau

>At the Golden Horseshoe Woodturners Guild in Burlington, Ontario, I was involved about four years ago in the first phase of upgrading our video from one TV and an old video camera. We implemented three of Woodchuckers minicams in addition to a roam-around camera and went to two TV's. All was routed through the Woodchuckers Switch Box into a VHS recorder and out to the displays over coax and channel 3. That was a major step to build on.

Our current setup uses a Panasonic Digital camera with image stabiliazation (was about $600 cdn) and usually two of Woodchuckers Minicams with the switch box. One is overhead the lathe and another usally aimed from as you face the lathe the left side and slightly behind the turner. Sometimes we aim one at a flip chart if the demonstrator is sketching. Lighting can be a major bugaboo. You need enough for the turner to work, but video cameras don't like bright objects in a dark background.

In the spring we added and an Epsom Video Projector and a rear projection screen (was not expensive). An old stereo serves as the audio sytem, but will likely be upgraded. The screen is hung from the T-bars of the suspended ceiling and is working out really well. No one walks through the light beam . Only negative is that if you are connecting a laptop for Powerpoint etc. you need long cables or a wireless remote for mouse control etc. to keep the speaker in front of the crowd.

Currently we make both a VHS copy of the demo (including all switched cameras) and a DVD made from the digital video camera. The image stabilization feature is not one I would overlook. The four foot image of a zoomed stabilized image is incredible. I call videoing a curse and a blessing at the same time. It takes a lot of work to get working smoothly and one person must accept responsibility. Setup can run an hour easily. Acceptance by the membership is overwhelming and that makes it worthwhile. We have 100-120 at an average meeting. At the GHWG, one member has put everything into a carrying case prewired to simplify setup. It took us almost four years of struggles reminiscent of the posts about videoing at Louisville, to get to that point. Don't get discouraged.

If anyone wants more technical details of models etc. I can dig them up.

Mike

Re: Recomendation on Club Video equipment

#11

Re: Recomendation on Club Video equipment

Russell L. Babbitt Jr.

>Mkauder, wow, a lot of different suggesttions for you to think about. I am curious. How large a group do you get for your demos? We get about 40-50.

Re: Recomendation on Club Video equipment

#12

Re: Recomendation on Club Video equipment

Ed Heuslein

>Howdy Mark: As usual, 100 responses will get you 100 different opinions. Here's mine. Consider the audio/video system with the same eye you would when buying a lathe. "Buy your last one first." I have been doing A/V for our club, East Texas Woodturners, for about 7 years. We typically have 60 to 70 attendees. Our first camera was a Sony Camcorder. Our second camera (for a rear shot) is a Sony Camcorder. Our third camera (for an overhead shot) is a Sony Camcorder. Remote Zoom is available on camera 2. All three can zoom up to about X-20. Image stabilazition is really nice on camera 1. Not necessary on 2 and 3. Now, you can see individual particles of dust while sanding if you want. Resolution is supurb. You just don't get that with surveillance cameras. And the color is just as supurb. So, I recommend getting good equipment, start small if you must, and build with more good equipment as you can. It's important to our club to have recording capabilities also and that's where the real cameras shine. Also, consider a push-button type switching device as opposed to the rotary type. Much less disruptive. Audio systems are not quite as difficult. But, my advise to stick with quality stands here also. I'll be happy to continue this by PM if you desire. Ed

Re: Recomendation on Club Video equipment

#13

Re: Recomendation on Club Video equipment

Mkauder, Phenix City, AL

>Our club is approaching 50 paid members, and generally have 30-40 members attending. Most are my age (51) or older - eyesight and hearing fading, and we meet in the woodshop of a technical college. When heat or air is on, it is hard to hear. When we had 20 members, is was no big deal for members who could not see to just get up and stand beside the demonstrator and look at what was going on up close. That is now a major distraction when you have 10 people standing around the lathe, and 30 people who can not see at all now.

Thanks

Mark

Re: Recomendation on Club Video equipment

#14

Re: Recomendation on Club Video equipment

Bill Crommett

>Mark : One of the problems that seem to be a constant with tha audio stuff is that it is run by young fellows with good hearing and they are used to turning up the Bass tones pretending that they are listening to GREAT music.. This is the wrong thing for older ears that have lost the higher frequencies, but the young fellows don't seem to understand. I have tried an ADVENT system that plugs into the master audio amplifier, but then the owners changed the amplifier system so there was no place to plug in my ADVENT transmitter. Then I got a reciever to tune into the lapel mik, but the lapel mik was tuned to a restricted frequency. Four new hearing aides just don't cut out the ambient noise of the hall, so I don't go to many meetings any more. Too bad.

Re: Recomendation on Club Video equipment

#15

Re: Recomendation on Club Video equipment

Steve Mushinski

>Bill,

Along with what you are saying. We had $1500 in audio powered speakers and equipment at out club. Still no one could hear worth a damn. A member knew a sound engineer, that set sound up for conference, who came to one of our meetings. We were doing everything wrong ( what we were told to do where we bought the equipment ). We also had the wrong mics for what we were using them for.

Things still need tweaking but thanks for your input as I will be asking the members with hearing aids if they are having any problems.

Mark, I find video to be pretty easy to look after but I do find to set up sound to be the biggest problem depending on the room you have your meetings. Our room is steel, steel everywhere. Not the best for sound setup. - Steve