Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Gray holly

Posts

Gray holly

#1

Gray holly

Dave Belser

>About a year ago I picked up a piece of holly at our club auction. It had been cut and sealed a few months prior. I paid $20 for a 4' section about 7" dia. with lots of small branch stubs so I knew it would have plenty of knots in it adding character when I turned it.

Anyhow, I finally cut it open and turned some small stuff out of it. I'm surprised at how gray the wood is, it is still very interesting and pretty but much grayer than what I've seen at the lumber yard. I bleached a few turnings and they are much whiter (of course:)

Picture is not great, actual color is a gray/cream with darker gray streaks.

So what's the scoop on holly? There must be a few varieties and I just got a more gray one? Or does it depend on the size age of the tree?

- Dave


img

Re: Gray holly

#2

Re: Gray holly

Gil Jones on Lake Seminole Georgia

>Holly turns a bluish gray very easily.

Re: Gray holly

#3

Re: Gray holly

BJ

>Dave, don't feel like your by your self on this question. What's happened to the holly you have has also happened to the holly I've collected, however bleaching didn't do much to change or lighten the gray. (tried two types bleach, one clorox and the other a two part composed of first sodium hydroxide and second 50% hydrogen peroxide). I have in the past left it all in log form with the ends sealed. My plan of action in the future is to make any and all green wood coming in into smaller and useable blanks with the pith cut out. I feel like when I do this the blanks will dry down fast enough that the blue stain (which I think is what the gray indicates)want develope. In the meantime I've got what I thought was some nice holly waiting to go into the stove (one whole tree with about a 12" trunk).

Re: Gray holly

#4

Re: Gray holly

Bill Hale / woodspinner

>Grey is good !

Why not us it ? Kinda like buckey without the dirt or rocks.

Good turning and be safe

Bill in Casa Grande, AZ. ( Last night for a couple of weeks )

Re: Gray holly

#5

Re: Gray holly

Hooligan

>Holly very commonly greys out when sealed. Several reasons for it, one is mold, another is the sealant itself. Some holly just never is really white. The further down the trund, oftten you see reddish/hazy grey stains.

I've used a lot for inlays on drawer fronts and face panels, and have had mixed results with color. Just the nature of the beast.

Re: Gray holly

#6

Of course I'll use it!

Dave Belser

>Thanks, Bill.

I just posted because this is my first experience with "raw" holly and I was surprised by color when I got into it. Next time I get a chunk of green holly I'll use some and save some. Holly is not to common around here so I was glad to get a piece.

- Dave

Re: Gray holly

#7

Andy DiPietro

Re: Gray holly, Citric Acid *LINK*

Andy DiPietro

>According to the article on the link: use Lemon or citric acid and water to whiten Holly. I have not tried it yet.


http://www.woodturns.com/articles/wood/holly.htm

Re: Gray holly

#8

Re: Gray holly

RobinCorell

>in my experiance holly tends to spalt if you so much as look at it cross eyed. It seems counter intuitive but I have had the best results by cutting a log lengthwise through the pith, removing the bark, and not sealing the ends. All these measures are aimed at drying it as fast as possible within reason. I still keep it in a cool shaded spot with good ventillation. I had one section where I didn't have time to strip the bark and found some spalted streaks in that one. Made me think that removing the bark may be the most important part of preping holly.

Robin

Re: Gray holly

#9

Re: Gray holly, Citric Acid

BJ

>Forgot to mention trying this (citric acid). The holly I have had not read the same story as presented at this website thus remained the same after treatment as before.