We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Back in '89, my father thought he was going to get into turning. He bought this ?chuck?. He has no manual for it, there are no markings on it and it doesn't look like what I see being sold as chucks today. He remembers paying a lot of money for it and it's never been used. Can anyone shed some light on this, please?
>This is called a Precision chuck made in England. Years ago Craft Supplies USA sold it. The chuck body is threaded and will only fit a lathe that spindle size, unless it was for a Shopsmith. As mentioned you see a 1" pin chuck and several collet pieces for internal gripping. The largest size you have is 3 1/2". I have this chuck and I think Ken Grunke also has one. It is very verstile and I advise you to hang onto it. A manual and parts may still be available from Craft Supplies England. I think Nick Davidson created this. GT
>They are a good chuck. Their only problem is that the jaws have a limited range of opening, and the spigot or recess has to be cut to a specific size with a close tolerance. Other than that, they hold a piece of wood as well as a scroll chuck.
>I haven't used mine, it has a 3/4-16 spindle hole and my lathe is 1"-8 tpi. But I intend to find a use for it someday. A great book written by a Brit in the 60's, Frank Paine, had a chuck design which I believe he called a ring chuck and I want to keep my Precision chuck for that purpose. The ring chuck is probably the most secure way of mounting a cylinder of wood for endgrain turning there is, no chance of coming loose. You turn a cylinder between centers, as for a box or vase, and turn the chuck end a little bigger so it's captured in the knurled ring of the Precision chuck.If you take a sledge hammer to the wood, it'll just ruin your lathe before the wood comes loose from the chuck. I machined my own ring chuck back in '91 or '92, and used it quite a bit until I bought my Vicmarc in '99. A year ago, a buddy from our club gave me the Precision chuck to see if I could do anything with it.