Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Rolly Munro Mini Hollowing System

Posts

Rolly Munro Mini Hollowing System

#1

Rolly Munro Mini Hollowing System

Ed Moore

>I liked what I heard about the Rolly Munro Mini Hollowing System so I have been chasing after one on the web. As has been mentioned, Lee Valley carries the large set, but I was unable to find the Mini System in the USA or Canada.

I did find the Mini System at Carrolls Woodcraft in Australia for $235 (AU), which is about $178. But I fear that the shipping will be almost as much. ;^D

Does anyone know of a source for the Mini System on this side of the Big Pond?

Ed

Re: Rolly Munro Mini Hollowing System

#2

Re: Rolly Munro Mini Hollowing System

Jennifer@Indy.USA

>Ed, at my class this summer, Graeme told me that Rolly gave him the small one he had before he came over to the States for the summer and that they were not yet out on the market here. I bet if you contact him directly from his website he could let you know when and where they will be available. The problem is....I can't find his website anywhere. I know he has one because I've been to it, but can't seem to find it?

Jen

Re: Rolly Munro Mini Hollowing System

#3

Re: Rolly Munro Mini Hollowing System *LINK*

Ed Moore

>Hi Jen,

Thanks for your help. I sent Rolly an e-mail by using his website. It was a Hotmail account and the e-mail bounced back. The good news is that Carrolls Woodcraft Supplies in Drysdale, Australia, responded very promptly to my enquiry and they have both models. And the shipping isn't too bad, AU$24 or a little over US$18. The Mini System costs AU$235 or about US$178.

Since I need to have some foundation work done for the Robust, the Finance Minister has put the cabash on ordering this tool now, and I can't blame her.

Ed

Check out:


Carrolls Woodcraft (Australia)

Re: Rolly Munro Mini Hollowing System

#4

Rolly Monroe email

Mike Nelson

>Jennifer, his email is (rolsbols@ihug.co.nz), web site doesn't give prices or much info but 'google' monroe articulated hollowing tool and you'll get there. Also I emailed him and his prices and shipping are a good bit cheaper than others. I think 11-15 US for shipping.

Re: Rolly Munro Mini Hollowing System

#5

sorry bout that..

Mike Nelson

>No 'e' www.rollymunro.co.nz web site.

Re: Rolly Munro Mini Hollowing System

#6

Re: Rolly Monroe email

Ed Moore

>Thanks Mike. I have e-mailed my questions to Rolly at the e-mail address that you provided. I'll share the info that comes back this way.

Ed