Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Exocet, Vermec, Hamlet and ???

Posts

Exocet, Vermec, Hamlet and ???

#1

Exocet, Vermec, Hamlet and ???

Ed Moore

>Like many of us, I like to research all the products in an area very well before I start getting serious about one of them. I have been told that the Vermec hollowing tool is one of the best and it doesn't get clogged. While watching a Jimmy Clewes DVD I noted that the Exocet cut very well on end-grain and I liked what I saw. So, I have been trying to check out the details of the Exocet hollowing tool. Apparently the website "http://www.linktechnology.org/" used to be the right URL for the Exocet. Well, now it gives you a site for parking your website, which is not very useful for hollowing out small boxes or vessels.

My questions:

1. Is the Exocet still being produced and sold? If so, where does one make the necessary contact?

2. How good are the Exocet, Vermec, or Hamlet hollowing tools in comparison?

Thanks,

Ed

Re: Exocet, Vermec, Hamlet and ???

#2

Re: Exocet, Vermec, Hamlet and ??? *LINK*

Carole Valentine

>Ed, there is a place in Quebec that carries the Exocet. In fact it is onsale for $166 CA (don't know what that is in US dollars)


Jacques Coulombe

Re: Exocet, Vermec, Hamlet and ???

#3

Re: Exocet, Vermec, Hamlet and ???

Greg Jensen

>I have tried them all and find the Rolly Monroe tool to be the best and simplest to use. All these tools produce shavings which clog the vessels quickly. I use a standard scraper type hollowing tool (like the kelton) then use the Rolly Monroe (available at Lee Valley Tools) to get a very clean cut. I find the exocet clogs.

Re: Exocet, Vermec, Hamlet and ???

#4

Leo Van Der Loo

$166.- Can. makes $148.- US approx. now

Leo Van Der Loo

>

Re: Exocet, Vermec, Hamlet and ???

#5

Just to Stir the pot a bit...

Jennifer@Indy.USA

>Ed...check out the Rolly Munro Hollowers. Lee Valley sells the larger one but he also makes a smaller version that I'd love to invest in some day. I used Graeme's this summer and it really was a nice tool for hollowing. No clogging, sweet cuts, no grabbing.

Jen

Re: Exocet, Vermec, Hamlet and ???

#6

Re: Exocet, Vermec, Hamlet and ???

Jennifer@Indy.USA

>Guess, I should read the other posts before posting :)

Glad to see someone else thinks the same about them Greg!

Jen

Re: Exocet, Vermec, Hamlet and ???

#7

Thanks, and I have ...

Ed Moore

>written to Rolly Munro asking him where one can obtain the small Munro system. It sounds like a winner.

Thanks to each who have tried to help me.

Ed

Re: Exocet, Vermec, Hamlet and ???

#8

Re: Thanks, and I have ...

Greg Jensen

>There was someone at the AAW show selling the mini Rolly tool. They were on the wall with there backs facing the main hallway. I do not remember there name. Mabe someone will.

Greg