Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Multi-axis stopper

Posts

Multi-axis stopper

#1

Multi-axis stopper

Gordon Seto

>First posting, I am fairly new in turning and learned a lot from WC. First try on multi-axis stopper on pin oak scrape. This is the direction I want to experiment. I don�t like the shape, but I can�t say why and where. All suggestions and comments are welcome. The wood won�t hold the sharp edge; therefore I didn�t spend much time on sanding and finishing. It was finished with ebonizing solution and spray lacquer.


img

Re: Multi-axis stopper

#2

Re: Multi-axis stopper

Carole Valentine

>Gordon, can you try to make your pics smaller? It's impossible to see the whole piece at once using the most common screen resolution of 1024x768. Try making them 400 - 600 pixels on the largest dimension and 80kb in file size. Your photo software should make it simple to do that. I took the liberty of resizing your pic so I could see the whole thing. Hope you don't mind. This is a cool concept - it might make you wonder if you have had too much wine! LOL I am wondering if breakage would be a problem under use. How much material is there attaching the top "disk" to the next one down?


img

Re: Multi-axis stopper

#3

Re: Multi-axis stopper

Gordon Seto

>Carole,

Thanks for resizing the photo for me. I was not lying that this was my picture upload.

There was 1/4" connection between the top and the 2nd disk. After you mentioned it, I tried to bend it and was amazed at the strength of wood.

I need help on the shape of this stopper. Besides the unique shape, the form does not please me. Sometimes we finish a piece, we have the feeling that it is great. Looking at the same piece months later, we start to think it wasn't that good and would do it differently. But I don't even want to waste $3 to put it on a chrome stopper kit. All constructive comments and suggestions are appreciated.

Gordon