Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Glaser gouge fans ?

Posts

Glaser gouge fans ?

#1

Glaser gouge fans ?

Bob Fawcett

>I bought a glaser 5/8" A11 gouge.

I noticed on reciept that the factory grind angle is very upright on the sides of the flute. Do most of you regrind to your own angles, or keep the factory angle?

The edge is very acute as recieved.

Re: Glaser gouge fans ?

#2

Re: Glaser gouge fans ?

Barry Turner

>That's the red handle one, right? I bought one of the new ones at the AAW Symposium in Louisville. So far, I'm just trying to maintain the factory angles until I figure out if I like them. What did you pay for that thing anyway?

Re: Glaser gouge fans ?

#3

Re: Glaser gouge fans ?

Bob Fawcett

>Yes its the red handled one.

I paid $135 or there abouts.

Woodworkers supply has a few. I think they are pre Cryo.

Re: Glaser gouge fans ?

#4

Re: Glaser gouge fans ?

Doug Thompson near Cleveland

>Don't grind it at all, it's a collectors item. Jerry himself ground that tool. To answer your question I kept the same grind.

Enjoy

Re: Glaser gouge fans ?

#5

Richard Allen

Re: Glaser gouge fans ? *LINK*

Richard Allen

>The pre-cryo Glaser gouges have a good grind on them. Maintaining that factory grnd will work well. If you are acustom to a different shape on your bowl gouge grinds than you should change it to the grind you are acustom to.

There is an article by Jerry Glaser on sharpening turning gouges here at Wood Central.

Link provided.


Glaser gouge sharpening article

Re: Glaser gouge fans ?

#6

Re: Glaser gouge fans ? *LINK*

Bob Fawcett

>Thanks Richard.

I think I have seen that article before, but forgot about it.

I think my gouge is pre-CET, although I bought it recently. I believe that it is new-old-stock.

Woodworker supply still had a few in stock if anyone wants one.


Glaser gouge