Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Axminster-Enco ?

Posts

Axminster-Enco ?

#1

Axminster-Enco ?

Mike Cunningham (Cape May NJ)

>I seem to recall a thread about a chuck, possibly a Bison, available at Enco that is the same as the Axminster 4" precision chuck but signifcantly less expensive. I want to add a chuck body to my Axminster collection. Does anyone know if my recollection is correct? If yes, do you know if it comes sized to specific spindles or is a threaded insert or backing plate required and finally do you know the item number?

I checked Enco online but can't locate the item.

Thanks in advance,

Mike

Re: Axminster-Enco ?

#2

Re: Axminster-Enco ?

bob davis

>try grizzly

Re: Axminster-Enco ?

#3

Re: Axminster-Enco ?

Mike Cunningham (Cape May NJ)

>I think you're referring to generic Vicmarcs not Axminsters.

Re: Axminster-Enco ?

#4

Sorry

Mike Cunningham (Cape May NJ)

>The thread that I referred to was at AAW and not here.

Sorry,

Mike

Re: Axminster-Enco ?

#5

Was it in reference to Axminster?

Craig Daymon

>I've been looking at the Axminster chucks. I like the idea that they have the largest selection of jaws and that the jaws work on all their chucks (collet chucks excluded). I also spoke with several european turners at the Symposium that said they are very well made chucks.

So, if someone is selling an Axminster clone or rebranded Axminster, I'd be interested.

Thanks,

Craig

Re: Axminster-Enco ?

#6

ebd

Re: Axminster-Enco ?

ebd

>I did extensive research on this after I ordered an Axminster and recieved a Bison. Axminster chucks are made for them by Bison in Poland. This was confirmed directly by Axminster in email. At one time the Axminster logo was part of the deal. Now they seem to come with a Bison logo. Bison makes a LOT of different chucks, most for metal working.

The Bison chuck I have has the following numbers/info on the body: 3706-100 nmax=5200V/Min 6773 04. On the Axminster body everything is the same except the 6773 04 is replaced by 1955 02 (probably a lot number). On both, the threaded adapter plate is labeled 23, though the Bison has a T as a prefix.

If you find the Bison at Enco, please post the info. I'll try it too. I've got 3 Axminster/Bison chucks and 5 sets of Jaws. I'd love to get 2 more bodies but at about $250 each it's just not justifiable.

Re: Axminster-Enco ?

#7

Re: Axminster-Enco ?

bob davis

>me thinks u are correct..sorry

Re: Axminster-Enco ?

#8

Re: Was it in reference to Axminster?

Mike Cunningham (Cape May NJ)

>Hi Craig,

I found that thread and reading it found that it was really nothing more than various posters speculating as to who/where Axminster chucks are manufactured and whether the Enco/Bison chucks are the same. Apparently they are not.

I have a 4" Axminster that I purchased a few years ago from Craft Supply and I'm quite satisfied with it. I have 4 different sets of jaws. I'm going to order a 4" Precision Aximinster and wanted to do a little research before ordering it, hence my original post.

If you punch in Axminster at Ebay you'll find a 4" available right now for about $130, CS sells it for $175.

The 4" Precision is $239.

Mike

Re: Axminster-Enco ?

#9

Re: Axminster-Enco ?

Mike Cunningham (Cape May NJ)

>Nothing to be sorry about, thanks for trying to help me!

Mike

Re: Axminster-Enco ?

#10

Re: Axminster-Enco ?

Mike Cunningham (Cape May NJ)

>HI EBD,

Exactly what I was trying to do myself, love to save a buck. Looking at the various chucks at Enco, Bison and others, none appear to be the 4" Precision that Axminster is selling.

We tried!

Thanks,

Mike