Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Making new mini tools

Posts

Making new mini tools

#1

Making new mini tools

John Lucas

>I made some mini tools for doing miniatures last year and they have worked fine up until now. I'm trying to make some really really small turnings. I tried using a finishing nail and a reground jewelers screwdriver. Still too big. I think I'm going to try to make some from needles tonight if I get time. I don't know how I'm going to grind the tip. I will have to temper the needles because they are too hard and brittle as they are. This should be challenging. I'll post photos when I get the thing turned, if I can actually shoot something that small.

Re: Making new mini tools

#2

Re: Making new mini tools

David Galloway

>I got a great lesson from David Elsworth ( all honor to his name) in terms of the variety of shapes of such tools for small vessels. I would love to hear of any shapes and plans you come up with. I have used some horse nails to grind to shape. As a blacksmith, I am committed to making my tools, especially the small ones.

Re: Making new mini tools

#3

Re: Making new mini tools

Carole Valentine

>Have you tried making them from dental picks? I can't WAIT to see what you are turning, miniature freak that I am! LOL

Re: Making new mini tools

#4

Re: Making new mini tools

john lucas

>David This is really tiny blacksmithing. I don't know if I can even get a hammer and forge that small :)

Re: Making new mini tools

#5

Re: Making new mini tools

john lucas

>Carole I've used dental picks before but in this case they are way to big. I need really tiny. I was going to make them tonight but It took 2 hours to mow the yard (which I do by hand) and I'm tired.

Re: Making new mini tools

#6

Re: Making new mini tools

Bill Turpin in WNC mountains

>John have you tried the hammers from an old dot-matrix printer. They are prehardened tool steel. You can pick up old defective printers at garage sales for almost free. There are probably loads of them lying around your university somewhere.

Bill in WNC mountains

Re: Making new mini tools

#7

Have you thought of sewing-machine needles?

Keith Newton

>Think of sewing-machine needles, they have a flute, and are made from very good steel, and have a larger square-mounting shank, that may fit into one handle, rather than making a handle for each one. I think you will need to get rid of about 2/3 of the length to keep them from chattering though.