Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Skew project

Posts

Skew project

#1

Skew project

Jim King

>The peice was made in six peices as you can see and when assembled makes a double bowl one on top of the other. Simple no shine finish. The wood is Dalmation Caspi and the peice assembled is 18 inches tall and 9.5 inches in dia.. I must admit it was the first time I ever sharpened a chisel on both sides, I actually fired a guy for doing that once. I never new what a skew was until yesterday. We call everything chisels "folmons" here as we never knew the English names. Sorry about the color varience in the photos, the sun was going down fast. This was made for a contest on another site that required that you only use one skew as the only tool to make the project. As my skew was a bit strange and being made out of a peice of pipe and an old wood rasp the first problem was getting my

strange skew approved but it made it.


img

Re: Skew project

#2

Re: Skew project

Jorge Castaneda ~ Downeast Maine

>Necesidad es la madre de la invencion!

Good job, both in the skew and the piece.

The proper name of that formon is "oblicuo"

gouges are "gubias".

Keep the chips flying

Jorge

Re: Skew project

#3

JL

Re: Skew project - like the concept...

JL

>and the bowls. Finial is interesting also.

Re: Skew project

#4

Re: Skew project

Jim King

>Thanks Jorge, now I can teach the locals Spanish. None of us had a clue as to the names.

Jim