Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Help! Turning a sphere

Posts

Help! Turning a sphere

#1

Help! Turning a sphere

Jim Dickman

>I need to turn a perfectly round 5" sphere to mount on a railing post. I have a cherry burl - it's pretty green yet. Any advice?

Shoud I hollow it out. Wall thickness? Mounting on a chuck?

Thanks to all you experienced turners...

Re: Help! Turning a sphere

#2

Re: Help! Turning a sphere

Greg Haugen

>A few options, Bob Rosand has an article on his site on Turning spheres. rrosand.com

There is also an article by Brian Simmons, I have a paper copy of it. I don't know if it's online somewhere. It's from AAW's American Woodturner, fall of 2001.

For chucking, I have seen Brian demo it and read Bob's article.

90% of the sphere is turned between centers, then a vacuum chuck is used. Brian used pvc or corian rings to "check" trueness of the sphere as he turns. A little area is worked at a time.

I wouldn't hollow it though. I also would not use green wood. Even if you hit perfect, it won't stay perfect.

Hope it helps

Greg

Re: Help! Turning a sphere

#4

Re: Help! Turning a sphere *LINK*

Fred Holder

>First, don't use green wood, the sphere will go out of round very quickly. There are almost as many ways to turn a sphere as there are woodturners who turn them. A way to turn them freehand is described in the article at the below URL. I wrote that article in 1997 after attending a Christian Burchard demonstration. Over the years, I've turned many spheres and have found the use of a swinging jig to be the most accurate if you need a specific size. I use a swinging jig to turn the precise 2-1/2" spheres that I need when making the Chinese Ball. David Springette shows how to make a swinging jig in his book Woodturning Wizardry. The one I currently use is more precise in terms of adjustment. I've described it in my book Making the Chinese Ball or Five Concentric Spheres.


Article on Making Spheres

Re: Help! Turning a sphere

#5

Re: Help! Turning a sphere *LINK*

Hooligan

>I found Lacers page to be of great help.


Alan Lacer's Free-Hand Sphere turning

Re: Help! Turning a sphere

#6

Re: Help! Turning a sphere

Bob Elliott

>Or you could go to the Florida Woodturning Symposium January 12-14 2007 and see Al demonstrate the technique in person!


img