Not Pallet Wood Re-Visited
Barbara Gill, Remlik VA
>The cottonwood plate is finished and ready to go. I have about 5 coats of Velvit Oil on the plate. It was sanded with 600grit wet/dry paper between coats. I am happy with the results.
Knowledge You Can Build On — Est. 1998
Not Pallet Wood Re-Visited
Barbara Gill, Remlik VA
>The cottonwood plate is finished and ready to go. I have about 5 coats of Velvit Oil on the plate. It was sanded with 600grit wet/dry paper between coats. I am happy with the results.
Re: Not Pallet Wood Re-Visited
Gil Jones on Lake Seminole Georgia
>You should be happy with it, that is a beautiful piece!!
Re: Not Pallet Wood Re-Visited
Roger Smith
>Barbara, that is one beautiful piece of wood. You did an outstanding job with it.
roger
Woo-Woo! Fantastic !
Brad Vietje
>
Re: Not Pallet Wood Re-Visited
Arch
>I'll just enjoy looking at this georgeous piece and would not suggest being rude by asking Barbara, but I wonder what some others of you at various levels of recognition who sell in different venues would realistically ask for this beauty? The prices on most web sites give me very little guidence. Maybe all art is that way and there can be no standard to go by. I understand it has to do with what someone will pay, but how to make the initial judgment?
Re: Not Pallet Wood Re-Visited
Ed Moore
>Barbara,
I had no idea that cottonwood could be so beautiful. Outstanding!!
Ed
Re: Not Pallet Wood Re-Visited
Arch
>Barbara,
There was probably an earlier post that explained or maybe everybody but me knows how, but how did you make the edge (groove?) of the center circle so that the 'flames' pass over it uninterrupted?
Arch
Re: Not Pallet Wood Re-Visited
Bill Hale / Woodspinner
>Barbara
FANTASTIC
I have lots of cottonwood and have never used it. I think you have changed my mind about just firewood.
Bill in Dolores, CO.
Re: Not Pallet Wood Re-Visited
Bill Crommett
>Arch : Price is something like in the eye of the beholder. I am reminded of the story Willard Baxter told of a time when he was studying with Rude Osolnik. Willard completed a turning and asked Rude what something like that would be worth. Rude's reply was "who's going to sign it, you or me ?"
Re: Not Pallet Wood Re-Visited
Arch
>Exactly Bill, but what I wanted in addition to praising Barbara's work, was to get a feeling for what _both Rude and Willard would have charged for the same piece in their separate situations translated to todays widely differing turners in their varying markets. I dispair of ever getting specifics in dollars if that's even possible except by asking a price directly and privately. Since I'm not a very strong customer or likely to buy, I
thought it more acceptable to try again here.
Re: OK now Barbara, you may....
JamieDonaldson
>... be pleased about the platter,but it deserves a better photo than this! It will sell so quickly that the image is all you will have to remember it by, so try again to do it justice!
Re: Bill and Arch- that is exactly ....
JamieDonaldson
>.... what Rude would have said! I don't see a size on Barbara's platter, but I would price it at about $300 for my market, and Rude would just add another "0" at the end!
Re: Not Pallet Wood Re-Visited
Barbara Gill, Remlik VA
>Arch, the edge goes straight down and is not very deep.
You are Right
Barbara Gill, Remlik VA
>When our daughter (professional photographer) comes next weekend, I will have her take a better shot. Thanks. :-)
Thanks For All The Nice Comments
Barbara Gill, Remlik VA
>I would not have posted this again but the finish changed the wood a little.
Wait A Minute!
Barbara Gill, Remlik VA
>That is the old picture. Either I really got mixed up or the software switched pictures!
Wow!!!
Bob Elliott
>
Re: Not Pallet Wood Re-Visited
eliot d
>You should be happy with the results. It's one of a kind. Lovely! Were you surprised by the flame grain, or did you think it was in there right from the beginning? Do you think there's something special about Velvet Oil, or do you think it would look about the same with, say, Watco, tung oil, Waterlox?
Re: Not Pallet Wood Re-Visited
Barbara Gill, Remlik VA
>Thanks Eliot. I knew the wood was highly figured but with rough sawn cottonwood it can be difficult to see the "whole story". I was amazed when the full figure showed up. I have never used Waterlox and have used Minwax Oil only once. I have used Velvit Oil for 10 years and I am not really interested in changing so I am not really qualified to compare them.
Absolutely beautiful, Barbara
Barb Siddiqui
>you make me want to dive in and Turn Everything that comes my way! That is just gorgeous.
Re: Not Pallet Wood Re-Visited
Barry Turner
>I don't believe I have ever seen a more beautiful piece of wood!
Well look who's lurking! :)
Carole Valentine
>
Re: Not Pallet Wood Re-Visited
eliot d
>Barbara, The truth is that I never heard of Velvet Oil. Do you know what's in it -- e.g. tung oil. linseed oil, etc? Are there any resins , for example?
Not Pallet Wood Re-Visited
Terry Quiram, Roanoke Illinois
>Barbara
Your repost is very timely. Last night at turning club someone asked me if Cottonwood was good for anything. Remembering your earlier post I said yes, save me some. I am going to forward this to him in hopes of getting a few pieces. Your piece is breath taking.
Terry
I Will Respond By E-Mail
Barbara Gill, Remlik VA
>