Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Rod Peterson

Posts

Rod Peterson

#1

Rod Peterson

DougJ in Crawfordsville, IN

>If plans stay on track, I should be in your neck of the country the end of this month. Going down to Ocala/ Silver Springs area for a few days (pleasure trip, not business). I know Ormond Beach is about an hour east of there. Any good wood related sites in that area or even the surrounding area?

Thanks,,,

Re: Rod Peterson

#2

OCF and the environs.

Rod Peterson -- Ormond Beach

>There was a tool/woodstore on SR 35 between Silver Springs and Belleview, but I've been told it went out of business. You'd have to go all the way to Casselberry (north of Orlando) or Jacksonville to see a Woodcraft, which you can see just as easily in Indianapolis, and that's more than an hour in the first instance, and almost certainly two hours in the second. There is, however, a pretty good hardwood store in Casselberry, not to mention a couple of malls (one in Altamonte Springs, right next to Casselberry, and another just up I-4 in Lake Mary) which means it might justify a family outing.

If you go that far, there's The Utter Guys in no man's land near Sanford and Lake Mary. They have some heavy ahrn, and it's fun to browse, but I'd be surprised if you spent a half hour there.

There's a very good hardwood supplier in Edgewater (about 40 miles south of me), but again, nearly a two hour trip, one way. There's another small supplier just around the corner from me, but it wouldn't be worth the trip to visit, unless you somehow calculated having lunch with me would make it so.

I've heard of an exotics supplier in Port Orange (just south of Daytona), but he doesn't really have a showroom—more like order off his price list and go pick it up, I think. I haven't been there.

In the other direction, there's a very good hardwood supplier in Lakeland, although I've not been there. That's probably an hour and a half from OCF. Ping Mike Fitterling on the Main board for information about that one.

Other than that, I'm told there're quite a few band mills in the area, but I'm unaware of any sophisticated sawing/drying retail outlets associated with any of them. There is however, Goodwins in Micanopy, just north of Ocala. I haven't been there, but I think he does have a showroom. If you remember a couple of This Old House episodes in which he's appeared, he does log salvaging and milling—mostly for flooring, but I think he does have flat stock for furniture making, too. I'm led to believe you need a Brinks truck both coming and going, though.

Re: Rod Peterson

#3

What about turning wood

DougJ in Crawfordsville, IN

>Thats alot of stuff, and I thank you for it all. I will have no family with me, its a loner trip. So my agenda is pretty much wide open.

Let me ask you this, what is a good Mid-Florida native wood to bring back to turn? Last time down there I picked up (what my grandfather called) some sand oak limbs for pen work. They looked good, but looking for something bigger to make bowls.

Thanks again,,,

Doug

Re: Rod Peterson

#4

Re: What about turning wood

Rod Peterson -- Ormond Beach

>I did a little more searching for you. Here's the woodfinder.com listing based on my zip:

  • Lee Tree Woodworks, Port Orange (I mentioned that one, and I think he does a lot of turning stock)
  • Chipmunk Hardwoods, Edgewater FL
  • Amazon Exotic Hardwoods, Inc., Casselberry (that's the one near Woodcraft, and I know they have a fair amount of turning stock)
  • Bushnell Sawmill, Inc., Bushnell (that wouldn't be all that far from Ocala)
  • Wellborn Cypress, Gainesville (just up the road)
  • Barber Lumber Sales of Alachua, FL, Inc., Alachua (also just up the road)
  • Hardwood Lumber & Millwork Lakeland (that's the Lakeland one I mentioned)
Be aware that Woodfinder is a subscription service (not unlike the Yellow Pages), so there may be several places around that don't show up in the search. I also did a search on Ocala's zipcode (34471), but it came up with pretty much the same list. Bushnell is only 35 miles away, though, and the closest one.

It's been a while since I've been in the Casselberry Woodcraft, but the last time I was in the Jacksonville one, they had really expanded their lumber department including a fair amount of turning stock. I'll be down in the Casselberry store next Saturday, and I'll look around and report back to you, if that's not too late.

Don't forget that my idea of a fair amount of turning stock  may be quite different from yours.

I don't really know much about native species—I'm a traditional maple/walnut/cherry/oak kind of guy. I would guess cypress would be a good choice, and probably live oak, as well. Further south, there's a Florida mahogany, but I don't know anything about it. If you were ever able to find some Dade County pine, you'd be impressed—practically the hardest wood known to man. Very resinous and impervious to insects. About the only place I'm aware of that you can find it anymore is from demolished structures.

Rod

(386) 316-7953 if you get over this way.

Re: Rod Peterson

#5

P.S.

Rod Peterson -- Ormond Beach

>Let me know if you need any kind of maps or directions. I don't know eateries over there, though, so I can't help with that, but so far as the places I've mentioned, I can lead you there pretty well.

Rod

Re: Rod Peterson

#6

Anything you want???

DougJ in Crawfordsville, IN

>Again, assuming that all goes well, I'll be down the end of the month. If I make it, is there any kind of wod you would like to try out that may not be native to you??? Let me know ASAP and I'll try to round some up for you and deliver it.

Re: Rod Peterson

#7

Thanks, but I'm fine.

Rod Peterson -- Ormond Beach

>I have turning blocks I haven't even chucked up yet in over three years. I'm still trying to get the shop rehabbed, although I am finally making some real progress. I appreciate the offer.

Rod

Re: Rod Peterson

#8

Hoosier in Florida

DougJ in Ocala, FL

>Well I made it down here to Ocala, and now everyone is leaving. I think it has to do with the potencial huricane coming in. So not sure how much site seeing I'll get done. Did go over to Ormond beach today though.

Re: Rod Peterson

#9

Re: Hoosier in Florida

Dennis Yoder

>Doug, think of it as an Indiana tornado with a lot of notice that stays around a little while. Doesn't look like Ocala will get much more than some rain. Be sure to see the horse farm off the beaten path. Dennis Y

Re: Rod Peterson

#10

Re: Hoosier in Florida

DougJ in Ocala, FL

>Looks like it will stay tropical storm and like you said, Ocala will just get some rain and outer band winds. I've seen thunderstorms up home worse than this. However, with the past history of hurricanes I don't blame the locals at all for getting prepared for the worse.

Re: Rod Peterson

#11

"Did go over to Ormond beach today though. "

Rod Peterson -- Ormond Beach

>And you didn't call????

Rod

Re: Rod Peterson

#12

Re: "Did go over to Ormond beach today though. "

DougJ in Crawfordsville, IN

>Prevailing circumstances prevented me from calling/ visiting.

You sure have a great place to live down there. (with the exception of the occasional weather issues)