Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

What kind of tool

Posts

What kind of tool

#1

What kind of tool

Timmy

>Hello to each of you. I want to do other things with my hollow work and do this to forms that are more wide than the ones that I have done before this. Which tool should I use to reach way over around to the side to hollow the forms of mine that are wide.

Thanks to you that will be helpful to me. You are very good friends and have me liking you.

Re: What kind of tool

#2

For wide, flat topped vessels...

TDaniel

>I use the Don Pencil armbrace with the hooked end piece. If the top is not so flat then there are other options that will also work.

TD

Re: What kind of tool

#3

Re: For wide, flat topped vessels...

Timmy

>Thank you Terry Daniel for your help that is give to me. This is a hard thing for me because I am not understanding how to get around that angle but maybe the pencil tool if I can find it will be the help that gives me the clear way.

Re: What kind of tool

#4

Re: For wide, flat topped vessels...

Don Evans

>Timmy:

Go to

www.donpencil.com

you can see his tools on his web site.

Don

Re: What kind of tool

#5

Re: For wide, flat topped vessels...

Timmy

>Mr Don I thank you with much feeling for your kindness. That is the place where I will look for the tools that Mr Daniels says are the ones that will do the trick. For you all is my happiness.