Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Display Aids

Posts

Display Aids

#1

Display Aids

Barbara Gill, Remlik VA

>I am looking for a source of round display pedestals of different heights and diameters. Not large free-standing floor models but ones that can be used for making a more interesting arrangements of bowls and hollowforms on multiple levels. I am certain I could have said that better.

Re: Display Aids

#2

Re: Display Aids

Stuart Johnson

>Depending on the size you need you could use pvc pipe. The size and length is what ever you want and a simple cloth drape could be used to cover the pipe.

Re: Display Aids

#3

Re: Display Aids

Barbara Gill, Remlik VA

>I had considered pvc with a turned wood top. Is it possible to paint pvc and have it look good?

Re: Display Aids

#4

Richard Allen

Re: Display Aids *LINK*

Richard Allen

>Hi Barbara

This is where I bought mine. There are loads of places that sell these things.

Good Luck


Aftosa

Re: Display Aids

#5

Re: Display Aids

Gil Jones on Lake Seminole Georgia

>Barbara, how about multi-tiered, Lazy Susans?

Re: Display Aids

#6

Steven Antonucci

Use Sonotube

steve antonucci

>it's used for pouring footings in concrete and such. Home Depot has it.

Steve

Re: Display Aids

#7

Re: Display Aids

John Veerkamp

>Barb,

Pvc paintsn just fine. Just make sure it's clean , and then brush or spray your choice of colors or finishes. Rust-oleum makes some very nice looking hammered look and stone look spray paints now.

John

Re: Display Aids

#8

Dick Hines

Re: Use Sonotube

Dick Hines

>PVC can be painted but it does scratch easy. The PVC can be wraped with self sticking shelf paper. The paper comes in all kinds of colors and will stand up to a harded use than just paint.

Re: Display Aids

#9

Re: Use Sonotube *LINK*

Peter Hyde

>Barbara,

Sonotube is available from any good builing supply center as well as HD. It comes in various diameters from 6" to I think 5 ft. and is available up to 16 ft. in length. It is lighter than pvc as it's a waxed cardboard product. It can be painted with any latex paint or have fabric stapled to it. To blank the ends use 2" styrofoam glued in with construction adhesive (comes in a tube and used in a caulking gun). Standing on end it is strong enough to hold a persons weight and can be cut with a box cutter or a hand saw. We use it a lot in theatre scenery and props, even build trees from it!

Peter

Visit my site at:

http://www.oldtoolsshop.com/Galoots/pHyde/


http://www.sonotube.com/products/round.html

Re: Display Aids

#10

Re: Use Sonotube

john lucas

>Barbara I noticed a lot of artists were using the sonotubes with wooden tops when I went to the last craft fair. I went specifically to see what people were using for displaying things like bowls and vases. The other item that seemed common were square wooden pedestals that stacked inside each other for moving and storage. I only asked a few people about these and they had all had them built woodworking friends.

Re: Display Aids

#12

Re: Use Sonotube

Norm Smith in Nova Scotia

>I have been using different sized saunatubes and they work great. They are light, paintable, etc. I made square tops of mdf and spray painted them with marbeling paint. You can slide the different sized tubes into one another for easy transportation.

Norm

Re: Display Aids

#13

An Alternative

Jennifer@Indy.USA

>Thanks for digging this up Bob :)

Barbara for an alternative for table top use, you could do the same thing I did here, but on a smaller scale with PVC pipe cut to different heights, and using smaller tiles.

Jen

Re: Display Aids

#14

Thanks So Much Everyone

Barbara Gill, Remlik VA

>You all have given me a lot of good information.