Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Almond HF with finial

Posts

Almond HF with finial

#1

Almond HF with finial

Colin Spencer

>This is my third attempt at a hollowform and is the smallest to date. It is 3�" in diameter and 3" tall (without the finial) and made from a piece of Almond branch wood that has a couple of punky stripes in it as can be seen just to the left at the top. The finial was an offcut of pau rojo that has been ebonised with Chestnut ebonising spray. The hf is finished with 3 coats of Rustins danish oil and then buffed.

This was a practice piece but SWMBO liked it and has added it to her collection. I am not sure about the finial and feel that it may be a bit too heavy. I do like the contrast between the heart and the sap woods. What do you think? Any comments welcome.


img

Re: Almond HF with finial

#2

Re: Almond HF with finial

Allen Neighbors

>Third attempt? Doing well, Colin. Like you, I think the finial is a bit heavy. I love the contrast in the wood. Beautiful.

Someone else will explain to you that the widest diameter of a pleasing form is about 1/3 down from the top, or 1/3 up from the base, rather than centered. That's what I try to do now.

For only your third hollow form, I think you're getting along very well. Keep it up.

Allen

Re: Almond HF with finial

#3

Re: Almond HF with finial

Lan Brady

>The wood of the hollow form has such wonderful contrast by itself, what if you did not put a finial on it?

Just my wondering mind, thanks for posting, Lan

Re: Almond HF with finial

#4

Re: Almond HF with finial

Gil Jones on Lake Seminole Georgia

>Very nice looking HF to me.

Good shape, and pretty wood.

Re: Almond HF with finial

#5

Re: Almond HF with finial

Colin Spencer

>Thanks for the comments. The reason for the finial is the punky edge of the hollowing hole. If I make it round the hollowform will almost become a bowl. I am going to try a couple of other finials as this one isn't glued in yet.