We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Allen, you crack me up! When I looked at the headers to your posts, I thought "What in the world constitutes the long side and the short side of a round bowl???" LOL Then I realized you had let it warp and move. :) Looks really good. I particularly like the bottom. How did you finish turn the bottom? Jam chuck, vacuum?
>Thanks, Bob. No, I didn't soak it. But while I was turning the inside, I sprayed the outside with the solution, to inhibit cracking while on the lathe. It didn't work as well as I wanted it to. I had one crack appear where I previously knocked a chunk out of the rim. Don't know if I caused the crack, or the heat in my shop.
>Thanks, Carole. Most of the time I have a lot of fun, but I often wonder about myself. :o))
I had to rig up a jam chuck. My others were all too small. I don't have a vacuum system... yet.
The largest reflected area of the bottom is the rim the bowl rests on. I just removed the 4-1/2" chuck tenon, and concaved it some and added the grooves.
>I tried to do that, but as shaky as I am, After I'd get about 2 inches of depth to 1/4" thickness, I'd go back and scrape a little to smooth out the grooves I'd left.
The only thing I don't like is the bark inclusion, in my book it is not "kosher". The warp is nothing, adds visual interest and the salad does not care...: )
>Thanks for posting, Jorge. I thought about taking the bark completely out, but so many of the people around this area like those little "apples", that I left it in. So far, I've never had any of the bark inclusions to release and come out. Must be the CA. :o)
I love these warped bowls. And you're right about the salad not minding. :o)