Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Starting Cap failed....

Posts

Starting Cap failed....

#1

Starting Cap failed....

Dave Belser

>again.

I have a Jet 1200 dust collector, (220V and remote). It is less than a year old. About 3 months ago I hit the start button, it wound up and then Pissthht - starting cap spews it's electrolyte. I called Jet and the replaced it under warranty. Now just last week the same thing happens again.

It seems to me that there must be another problem or perhaps I just have bad luck. Any comments?

I'm about to call them again and thought I'd ask the group before I did.

- Dave

Re: Starting Cap failed....

#2

Re: Starting Cap failed....

Gerry Meekins

>Dave,

I'd pop the cover off of the impeller and see if anything is caught in it. Roll the impeller by hand and see if it rotates smoothly. If all seems ok I'd say you've been unlucky with caps..

Gerry

Re: Starting Cap failed....

#3

Re: Starting Cap failed....

Dave Belser

>Gerry,

It spins just fine. It still starts (just a little slower) seems to work just as well otherwise. Weird that it would blow 2 caps in 3 months.