Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Questions ?

Posts

Questions ?

#1

Questions ?

EMRJPV

>Ok have a few questions....

1. How do you prepare the wood for turning bowls? I am finding it difficult to do the centering thing with a chunk that I have tried to round with the cahin saw. I half the log length wise then cut those sections across, then round the corners as good as possible. Any thoughts?

2. Do you prefer to turn while still wet or dry?

3. Ive been playing with spindle turning to learn what the tools do and am planning on taking the next class but cant wait on the class to start,yet I dont want to learn bad habits(Geeze! am I actually trying to be mature? Scary seeing how Im only 28}

4. I live in Greenville SC and wonder if any of you are close?

Re: Questions ?

#2

Re: Questions ?

Lan Brady

>Your best bet is to find someone local to mentor you through the process.

Second option is to find the Bowl turning video by Bill Grumbine. Watch it several times and you will be ready.

You are probably impatient and want to do it now( If you are like me).

Good luck, I hope you find someone local to guide you with basic education. There is no substitute.

Lan

Re: Questions ?

#3

Re: Club in Asheville, NC *LINK*

Bill Turpin in WNC mountains

>Carolina Mountain Woodturners will meet at Folk Art Center on Blue Ridge Parkway, Asheville, NC on August 19 at 10 AM. World class demo is FREE. This is the largest turning club in America with over 425 members. E-mail warren@carpenterbuilt.com, he is our president and he lives in Greenville area. He can probably fix you up with a carpool.

Woodcraft store in Greenville has frequent turning classes.

Bill Turpin in WNC mountains, Hendersonville


CMW

Re: Questions ?

#4

Re: Questions ?

eliot

>You have gotten two excellent responses. I know you are impatient to get started; but you can get hurt real bad if you don't know a couple of things to set up right. You just have to get some instruction or at least watch a video or read a book before you start turning. For example, there's a whole world of knowhow for just sharpening, mounting, roughing, SAFETY. The list goes on and on. Be patient. When I started, I watched a video by Richard Rafan, who is one of the world's best skew chisel masters. Like a fool I just jumped in. luckily I didn't get hurt, but when I attempted to turn, nothing happened! No wood came off the piece.! I called the guy who sold me the (used Sears lathe) and told him of my problem. He actually got angry with me; and I surely deserved it. The problem was that I had no idea at all what a sharp tool should look like -- let alone how to sharpen one properly. And to start with a skew chisel! Insane! Take the advise here. You'll have a blast if you do it right.

Re: Questions ?

#5

Re: Questions ?

Phil Lieberman

>Greenville SC is right down the hill from here just about 45 depending on which side of greenville you are but i could send pictures that might help

Re: Questions ?

#6

Re: Questions ? *LINK*

John Uteck - Charlotte, NC

>It's a bit of a haul, but there's an NCW meeting in Hickory, NC this Saturday from 10-4 at Klingspor's. You're welcome to come and meet some other turners.


NC Woodturners

Re: Questions ?

#7

Re: Questions ? *LINK*

john lucas

>The link below may help you find someone closer to you. John C Campbell folk school is not too far from you and has some excellent classes. www.folkschool.org and Highland Hardware in Atlanta has classes (can't remember thier URL but they are easy to find).

I use a wooden disc but cardboard works well also. Place the disc on the wood with a screw or nail. Now you can cut as close as possible to the disc with the chainsaw. This gets the piece closer to round and you have a center point marked.

Chisel away the bark where the centers go so you have something solid for the centers to grab. STart the lathe as slow as it will go then go for it. It would greatly increase your safety and the learning curve by watching someone else who knows how to use the gouges correctly, which is why everyone is suggesting taking a class or going to a meeting. You'll also find out how great all these people are which also enhances your turning experience.


http://www.woodturner.org/community/chapters/members.pl?submit=Chapter+List

Re: Questions ?

#8

Re: Questions ? *LINK*

Raymond Overman in SC

>Since John Uteck mentioned Hickory's club, I'll mention Charlotte's woodturners group which actually is meeting in Fort Mill, SC right now. We meet at Benton Landscaping in Fort Mill at 6 PM every third Thursday of the month. That would be Aug 17th this month. Feel free to email me for more information.


http://www.charlottewoodturners.org/

Re: Questions ?

#9

Re: Questions ?

David Galloway

>I was like you many moons ago and struggled to get the knowledge from books. It is amazing that I did not kill myself. Things can go wrong quickly if safety is not at the top of your list.

Retrospectively, I could have saved myself a lot of wasted time if I had taken a class. YOu can do that in at least two ways. One is to spend a day with a good teacher and let him/her give you individual attention. You'll be amazed at what you learn. I would suggest Nick Cook in Atlanta www.nickcookwoodturner.com. The other way is to take a class at a place like JOhn C. Campbell. www.folkschool.com. The communal way of learning is fun and you do get some individual attention from instructors.

Have patience and be safe. And have fun.

Re: Questions ?

#10

Re: Questions ?

john vitosky

>I have the book by Richard Rafan and have used it and several others. Mr Lieberman if you want to send pics that is fine.