Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Videos

Posts

Videos

#1

Videos

Skip Beardsley

>Our club is updating the book and video library and I am looking for suggestions. What are your favorite books and videos? Which ones do consider " classic" which should be seen or read by all turners? Which new ones are worthy of purchase.

Thanks

Re: Videos

#2

Re: Videos

John Lucas

>Skip The AAW CD on sharpening and Bill Grumbine's DVD on bowl turning are two of my favorites.

Re: Videos

#3

Re: Videos

Ed Moore

>I recommend the Jimmy Clewes DVD set. John has already mentioned Bill Grumbine.

Ed

Re: Videos

#4

Re: Videos

Tony Augruso

>I'm relatively new at turning and I'll second the Jimmy Clewes 3 disk DVD set. He shows exactly what is going on with excellent camera angles.

Tony

Re: Videos

#5

Re: Videos

David Galloway

>I think Grumbine's is the best. I also like the Elsworth series, Mahoney is awesome. There's so much out there now that was not available ten years ago.

Re: Videos

#6

Brad Vietje

Re: Videos / Books

Brad Vietje

>I only have a few videos, so I'll let others fill out that list. As for turning books, there are quite a few that would be very helpful in a club lending library -- all are excellently illustrated and give clear instructions:

* Woodturning: A Foundation Course, by Keith Rowley (mostly for beginners)

* Turning Wood With Richard Raffan -- also available as a video

* Turning Bowls With Richard Raffan " " " "

* Turning Boxes With Richard Raffan " " " "

* Turned Bowl Design (Raffan) -- old, but excellent

* Woodturning: A Fresh Approach, by Robert Chapman (excellent book for intermediate turners with some very challanging projects!)

* Turning Green Wood, by Michael O'Donnell (all about handling green wood from tree to table)

* Pen-Making Books: Frankly, I'm left un-impressed with the 2 pen making books I have (Dick Sing and Christensen/Burningham). While both are good at showing a few basic techniques and some design ideas, neither explains to the absolute beginner, that pens (from kits) are all based on a simple construction with drilled wooden blanks, inserted tubes of brass, and they get turned on a mandrel with little bushings to get the outer dimensions just right, and that different kits need different sized holes drilled, different tubes, and different bushings. My sense is that each of these books needs a Chapter 1 (Chapter 0.5 ?) that's missing -- it would explain all these basic concepts before jumping into the woods, tools and techniques used. I feel a novice turner might want to know what he's about to do and WHY before getting started. Most pen books leave me flat.

* A "Turning for Furniture" sorta book: While Rowley's book does this quite well, I think a good book on spindle turning for furniture or architectural needs would be great to have. Since I don't have one, maybe someone else can suggest one. A good classic on spindle design might be more useful than one on turning technique.

My 3 cents,

Brad Vietje

Newbury, VT

Re: Videos

#7

Re: Videos

Sean Troy

>I would say anything from,Jimmy Clews,Mike Mahoney,Alan Lacer, Chris Stott to start with. They are all easy to learn from. Good teachers

Re: Videos

#8

Re: Videos

bowlman

>As far as "classic" videos, you should at least consider the DEl Stubbs video, The Richard raffan series, Ray Key, and if you are interested in hollowing, Ellsworth, Jordan, and Hosaluk. Just my opinion.

Re: Videos

#9

AAW Videos

Gregory Haugen

>Check out the AAW videos, alot better priced and excellent teachers and turners, Bob Rosand -Turning projects from scrap-HIGHLY RECOMMEND. Mark St. Leger, Nish, Ellsworth, etc.

Check it out before you knock it.

Re: Videos

#10

Re: Videos

Dinyar Chavda

>If you want to understand sanding through finishing, an essential video is Russ Fairfield's set of 3 videos. John Jordan's Aesthetics and Properties of Wood is outstanding in terms of how to see what you can get from a log.

Re: Videos

#11

A good Pen Turning Video is... *LINK*

Clem Wixted Jonesboro, AR

>... by Bill Baumbeck.

It covers all of the basics and then some.


Pen Turning Video

Re: Videos

#12

Re: A good Pen Turning Video is...

Ron McKinley

>Here's a good one and it's free: http://www.pennstateind.com/store/_free-dvd.html

Re: Videos

#13

Re: Videos / Books

W.C. Turner

><<< A "Turning for Furniture" sorta book: While Rowley's book does this quite well, I think a good book on spindle turning for furniture or architectural needs would be great to have.>>>

Brad mentioned this above, and here's one. "Turning for Furniture" by Ernie Conover.

W.C.

Re: Videos

#14

Re: Videos

tm

>Bowl Turning with Del Stubbs

Woodturning Getting Started Right Alan Lacer

Woodturning Fundamentals of Sharpening AAW

Richard Raffan's are all outstanding, but sometimes I think

his pace is a wee bit too rapid.

Re: Videos

#15

Re: Videos

Wilford Bickel

>Probably my favorite Video (DVD) is the one with Mike Mahoney and Stuart Batty in "Two Ways to Turn a Bowl". I learn something everytime I watch it! On top of that it is just plain entertaining!!!