Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

VL300 Pulley Ranges

Posts

VL300 Pulley Ranges

#1

VL300 Pulley Ranges

gtwilkins

>Good Evening All,

Finally got the walls built and the power run so its time to fire up the blue beaut. The manual I received has only 2 pulleys 10-1000/30-3000 however this one has 3, so is the middle one 20-2000?

What are the numbers on the VFD display motor rpm?

Like a kid waiting for Christmas Day,

Thanks. Trevor in Grand Forks

Re: VL300 Pulley Ranges

#2

Re: VL300 Pulley Ranges

two ton tommy

>This the response I got from Vicmarc in December 2003

Tom,

Nominal speeds are as you quote, but they vary slightly depending on motors and drive configuration. For your information I have just measured a VL300 lathe on pre-delivery testing with a digital instrument and the speeds were 15 to 976; 32 to 2065; 46 to 3014 RPM

Have a nice weekend

Walter

----- Original Message -----

From: Thom Myers

To: 'Walter Baumann'

Sent: Friday, December 12, 2003 4:40 AM

Subject: RE: VL300

Walter,

Thank you. Your response was indeed helpful. However, would it be possible to get the rpm break down for the three steps. Would it be top end 1000 rpm, 2000 rpm and 3000 rpm respectively?

Re: VL300 Pulley Ranges

#3

Re: VL300 Pulley Ranges

Greg Jensen

>Digital read out is motor RPM.

Greg Jensen