Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Best Wood for Jam Chucks

Posts

Best Wood for Jam Chucks

#1

Best Wood for Jam Chucks

Ron McKinley

>I like to turn lidded boxes and always need a jam chuck to finish the bottom of the base. What is the best wood for this purpose?

I've been using up a lot of "soft" hardwoods like Alder and Myrtle to hone my skills before I move up to exotics. Ray Key, in his box turning video set, recommends a wood softer than the material you're using. In the videos it looks like he uses Ash when turning Masur Birch boxes. Just read that Ash is getting scarce due to a beetle infestation.

I've tried face-grain pieces of Doug Fir cutoffs from 2" x 4"s but face grain doesn't seem to grip as well as scrap pieces of the same end-grain material I'm turning. If I laminate pieces of Doug Fir to get end-grain waste blocks do you think that would work better? Thanks for any help and or advice........Ron

Re: Best Wood for Jam Chucks

#2

Re: Best Wood for Jam Chucks

john lucas

>Ron I've always used the same wood I'm making the box out of. On rare occasions I use other woods. I usually prefer something like mildley wet maple not so much because it's soft but the wet wood seems to hold the box better than dry wood.

Re: Best Wood for Jam Chucks

#3

Re: Best Wood for Jam Chucks

Ron in Drums PA

>I use MDF mounted on a face plate.

Sometimes I use bathroom paper to make the fit tighter.

Re: Best Wood for Jam Chucks

#4

Re: Best Wood for Jam Chucks

Jake Niedling

>Ron - I usually keep all the cut offs and previous used jamb chucks. I can usually find one the can be turn to fit the box. I try to use the same piece of the box, like John said as well. If not enough material left over, then search thru your old jamb chucks. They usually already have a tenon on them. I usually don't worry about the wood type.

Re: Best Wood for Jam Chucks

#5

Re: Best Wood for Jam Chucks

Ron McKinley

>Thanks John. Wet wood here in the Mojave Desert is kind of hard to come by! BTW, looked all over for you in Louisville but we never ran together. I asked the vendor from Crossville if you were here and they said yes so looked even harder. Maybe next time......Ron

Re: Best Wood for Jam Chucks

#6

Re: Best Wood for Jam Chucks

Ron McKinley

>Now that's a great idea and certainly cheap enough. Thanks....Ron

Re: Best Wood for Jam Chucks

#7

Re: Best Wood for Jam Chucks

Ron McKinley

>Thanks Jake. I do keep them all but I start out with small pieces just barely long enough to make the box. I got some "flitches" from mills in Oregon from a friend years ago when I didn't turn and am trying to use them up and hone my skills at the same time. ....Ron

Re: Best Wood for Jam Chucks

#8

.......Is The Wood You Are Using

Barry Turner

>I always make sure the blank I am turning a box from is long enough to make a jam chuck for turning the bottom. When you finish the box and part it off, the remaining blank is already close to the right size and you don't have to find, chuck and true up a new piece of wood. It makes the work flow better. Softer or wetter woods may hold a bit better, but you are only truing the bottom of a box, not turning for an hour or two. The wood you are using for the box ought to wok just fine.

Re: Best Wood for Jam Chucks

#9

On the Wood working Channel......

Barry Irby

>Someone was turning something that required a jamb chuck and got it a bit loose. Used chalk on the spigot and that improved the friction enough to make it work. (That's chalk, not caulk, but caulk would work too if you let it dry. Maybe not, a goo idea.) (A goo idea, man am I funny for a Monday)

I have not tried the chalk, but I made a mental note of it.

Re: Best Wood for Jam Chucks

#10

Re: Best Wood for Jam Chucks

John Lucas

>Dang Ron. I had my halo on at full intensity so everyone could find me. And if you believe that I've got a bride to sell. :)

Re: Best Wood for Jam Chucks

#11

Re:Two criteria for jam chucks...

JamieDonaldson

>...stable and cheap!!You will soon have a collection that serves most purposes, but many keep getting smaller and thinner with age??

Re: Best Wood for Jam Chucks

#12

Jamie, that pretty must says it all.

Dave Smith, Longview, WA

>

Re: Best Wood for Jam Chucks

#13

Brad Vietje

Re: Best Wood for Jam Chucks

Brad Vietje

>I save every piece that has a tenon to fit my various chucks & jaws in a big box, so I can hunt through it whenever I need to reverse something, refinish a piece, or for making small jam chucks for boxes. Every now and then I burn a bunch to make room, but not often. I usually use the same wood I'm working with, but have also used a number of softer or green woods. A wet paper towel between two dry pieces of wood can sometimes work, or can be used to add some moisture to those dry Desert Southwest woods.

If you want a good, somewhat soft, cheap, stable wood, look into White Birch or Poplar.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Best Wood for Jam Chucks

#14

Thanks to all...

Ron McKinley

>I've gotten some really good ideas here. I really appreciate all your responses.........Ron

Re: Best Wood for Jam Chucks

#15

Re: Best Wood for Jam Chucks

eliot

>Cindy Drozda likes mahogany -- and she's very fussy about it. Anyway, that's what she said at a demo.