Lathe Stand
Randy in Calgary
>Hi All,
I am looking for ideas for building a stand for my lathe. Any plans/pics/links out there? That rickety metal stand that came with it is starting to get on my nerves.
__________________
Cheers
Randy
Knowledge You Can Build On — Est. 1998
Lathe Stand
Randy in Calgary
>Hi All,
I am looking for ideas for building a stand for my lathe. Any plans/pics/links out there? That rickety metal stand that came with it is starting to get on my nerves.
__________________
Cheers
Randy
Re: What lathe?
JL
>
Re: Lathe Stand
Joe Flemig
>If I recall correctly, either Woodsmith #12 or Shopnotes #12 has a lathe stand. I modified the sizes to fit my lathe, but it worked quite well.
Joe Fleming - San Diego
Re: Lathe Stand
Robert Cox
>My Jet Mini is on the following
6x6, 4 4" concrete blocks, 2x4 cap. All through bolts with 3/8" allthread.
2 2x4s to set the lathe on.
A 2x4 attched under the lathe and to one of the 6x6s provides bracing.
I made it about a foot longer than the lathe.
Re: Lathe Stand
Pete LaBelle
>One word: mass.
Although 2x2's will make an adequately strong stand, mass is your friend when turning. Use heavy timbers thru-out and fasten all joints well. Sand & varnish afterwards to ease cleaning in the future. Small pieces of rubber conveyor belt under the feet absorb noise and keep it from wobbling or moving across the floor.