Baseball Bat Template
Randy in Calgary
>Anyone know where I can get a template (dimensioned drawing) for a baseball bat?
Thanks
Randy
Knowledge You Can Build On — Est. 1998
Baseball Bat Template
Randy in Calgary
>Anyone know where I can get a template (dimensioned drawing) for a baseball bat?
Thanks
Randy
Re: Baseball Bat Template
Bob Fawcett
>I would take my tape and a caliper down to the local sporting goods store.
Re: Baseball Bat Template
David Galloway
>What I do is take the bat I want to turn and place it behind my lathe. With calipers set at various points in the length of the bat, reproduction is fairly simple, even for me.
Funny piece, while I was trying to produce a fungo bat for our coach, I could not believe how thin the handle was. It finally made sense when I remembered that a fungo bat is used by the coach to hit ground balls to the infield. So it does not need to have the wood of a real bat.
Also, the kids on our team had never heard the "crack" of the bat, and asked me to make them one. Pretty cool.
I have found a couple of excellent sources for bat turning blanks. My only trouble was finding cork.
Re: Baseball Bat Template
Roger Smith
>Randy, I did the same as the others. You may contact Cooperstown Bat Company at 888.547.2415. They may be able to provide a template for you. I also purchase my blanks from them. I think less than $10 each the last order.
roger
Cork? :o)
Paul Porter
>
Is your lathe big enough for this?
Mike Brazeau
>
Re: Baseball Bat Template
Mike Brazeau
>Randy - take your pick. The Louisville Slugger Tour was a great add-on to the AAW Symposium.
Mike
Roger can you send a link
Dennis Taylor
>Roger, I checked out there web site, but I can't seem to find where I can order blanks for bats, if the $10.00 price is right, that isn't bad at all, and wanted to check it out...Dennis
Re: Baseball Bat Template
Randy in Calgary
>Thanks to those who responded. I found this one, and turned a 3/4 scale one for my 7 year old son.
Cheers
Randy
Re: Baseball Bat Template
Allen Neighbors
>What's the bulge for, in the bat on the right?
Allen
Re: Baseball Bat Template
Craig Daymon
>Thats' the one the article featured. (Wood magazine, maybe Popular Woodworking or Woodworker's Journal?) I think it is from around 1920 or maybe 1929. I think several of the big hitters used that style. If I remember the article correctly, the knob is about 6" up and the style was used by the likes of Honus Wagner, Ty Cobb and the Babe.
I'm thinking it was Woodworker's Journal. Might have even been in a recent e-zine issue, which may mean it's on the net somewhere for free.
-Craig
More bat dimension info. *LINK*
Craig Daymon
>The article featuring the bat template was from Woodcraft Magazine. I got a copy from their web site, which I'll try to post the link below. (Hopefully, right to the article, if it is still there.)
Also, from attending Mark Sfirri's AAW demo, he mentioned standard bat dimensions being 2" in diameter for the knob, handles are from 1" to 1.5" in diameter and the end is 2.5". The rest is basically tapering from end to knob. (Of course, this is without any twists or chunks turned away like on a typical bat from Mark.)
-Craig
P.S. Just looked up the project on the site. They want you to log-in to be able to read it, but the article, "Out of the Park", can be found on page 9 of the "Projects" section.
Woodcraft Magazine
Re: Roger can you send a link
Roger Smith
>Dennis, I do not think they sell over the web. I had to call the 888 number. I knew they sold the blanks. I visit their place when my grandson played at Cooperstown.
roger