Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

CET responses below

Posts

CET responses below

#1

CET responses below

Ed Moore

>I followed the CET/Stuart Batty thread with interest and was hoping for more information. I went to Louisville with one tool purchase in mind, to get a Negative Rake Scraper from CET. I got no satisfaction from their representatives and gave up.

CET has responded, twice, to some of the questions raised in the thread that started several days ago. I think that anyone interested should scroll down and read the CET responses. Those who castigated them blindly owe it to CET to hear their side of the story.

Ed

Re: CET responses below

#2

Re: CET responses below

Greg H. from Wisconsin

>I have read the response that are below. I have a few reactions to them. First, when CET was cutting down the individual who is also making tools doesn't show a lick of maturity in their sales. At one time they would have been there too. Secondly it doesn't really matter how many thousands of tools you make if by the time you get them out you have pissed off the entire woodturning community in the U.S. Nobody is asking for the full line, a few "basics" should be in order. The name of Glaser in my opinion has been raked over the coals for too long, I really hope you gave Jerry a fair price to destroy his name.

I am a turning, I do spend a fair amount of money on equipment, I spend first to those places that will SERVICE my needs. Service, you better look that up in the dictionary. There are alot of tools out there, some even "Kryo" technology (Henry Taylor) lower price and YOU'LL GET THE TOOLS! Or call Oneway and get a m4 gouge. These companies aren't breaking the world. They have made a few tools and gotten them out and serviced the customers. When they make more, they'll sell more.

If I was going to spend over a thousand dollars for tools they better cook breakfast and clean up the shop as well! Give me a break, teach someone to sharpen a tool and get on with life! The tools do not make the craft, DO NOT! I could give someone a Sear's set and they would turn the same as with your tools, why would I spend that on tools instead of a bigger bandsaw or something!

If I was given one of your tools, I would use it as a wedge level a workbench! With you new handle that's what makes if different from my tools it would make a good door stop, it wouldn't roll away!

sincerely ticked off at CET,

Greg

Re: CET responses below

#3

Re: CET responses below

Sean Troy

>Come on Greg, tell us how you really feel. LOL

Re: CET responses below

#4

Re: CET responses below

Ed Moore

>Greg may have it right. For me, the jury is still out and hasn't voted yet. CET has the potential to produce a good tool. Apparently they also have the potential to charge California prices to Middle America - a strategy that is destined to bite them where it hurts. I like my Glaser tools and am puzzled by an approach that seems likely to make me look elsewhere. In fact, the Sweazey gouge that I just bought is at least as good as any I have used to date. While I might like to try some of the lavender-handled tools, if I don't I'll still have fun turning. Had I been the one in charge of decisions on the Glaser line you would have thought the change was seamless, the tools would still be "rolling off the line" and there would have been no change in price. CET seems to have allowed themselves to be distracted and the word "seamless" is not in their lexicon.

I went to Louisville to buy a Negative Rake Scraper from CET. Forget it.

Ed

Re: CET responses below

#5

Re: CET responses below

OB O'Brien

>Yeah ! I also wanted to buy one of those negative rake scrapers. Like the one Beatty was demonstrating. It wasn't for sale. So now I'm going to make my own.

Re: CET responses below

#6

CET - come on guys! Long

Mkauder, Phenix City, AL

>First of, this not some Flame on anyone, it might qualify as a Rant. Second, as I have said before, I do not have an interest in CET other than as a customer. When I get mine, I will give it an honest try and honest review. If it falls short, technically, or performance for the money, I will let them and you know.

Come on! Pissing off the entire woodturning community? Distroying Jerry Glaser's name? As far as I know, Jerry is a paid consultant for them.

The situation, as I understand it from talking to some of them, and from other knowledgable turners seems to : 1) that Jerry was going to retire, i.e. no Glaser tools at all 2) Stuart Batty had been working a little with Glaser, especially on getting him to produce this design of a negative rake scraper with Jerry's metal, 3) CET decided to take over the production of the Glaser line AND produce a new line - Cryo, 4) I never heard anything about CET producing the negative rake scraper - when I asked about one, I was directed to Stuart, and I talked directly to him to get one.

Now, in nothing that I have seen have they trashed Jerry. Quite the opposite, they did not have to take over his line - they could have just make a similar line with the same metal. They featured Jerry in poster and his name all over the place at Louisville. They started a new line - Mini-G. Not Mini-CET. Not the sort of tool line you would tool up for if you were going to end an association with the Glaser name. They are keeping the Glaser line and expanding into another - admittly pricey line - Cryo. I bought a Glaser 1/2" bowl gouge for $135 at Louisville, that seems to be right in line with what I could have bought it for from anyone that carried Glasers - if they had them. It did have the more U-shaped flute design, that Stuart told me to my face that he was trying to get Jerry to change to, and what I wanted.

Some people that seem to be complaining about not having any Glasers available now, are some of the same people that were willing to wait for one from Jerry.

I heard about the new tools (at that time all I knew about was a basic Glaser bowl gouge with a U shaped flute) about 1 1/2 - 2 years ago. I have followed the gossip and the web-site once it was established. No one was waiting with more anticipation than I was, but when I understood that they were not just moving into Jerry's shop and taking it over to produce his small scale production, but tooling up for a larger scale production, I understood the probable delay. They never said that they would have tools for sale at Louisville. They said that the tools would debut at Louisville. When I hear about a new car being developed, and that it will debut at a car show, I do not expect that I can buy one there or have no right to be upset about it. I expect them to be gauging public reaction and scaling production to reflect the public acceptance of the design and the pricing. As was evident by their "Booth" they are used to going to huge industry trade shows. It was not some table covered with a sheet. Turning tools are not their sole reason for being, I am sure that they must be doing other high-end metal work. No one is going to do all this work for the maybe 20,000 turners in the country. If every one of them bought two tools for a total of $500, they would only make $10m, pretty good, but you can't do that every year or two with the turning community.

To me it seems, that their mistake was letting anyone know about the new tools until they were available or at least until they just showed up at Louisville. How many of you knew that Henry Taylor Kryo tools would be coming until they showed up in the catalogs? And $90+ dollars for a 1/2" bowl gouge with a plain wooden handle made of M2 steel that has been cryogenically treated? Seems like I got a deal on a Glaser handled powdered metal tool for $135

Rant Off.

Have a better day

Mark

Re: CET responses below

#7

Re: CET - come on guys! Long

Greg H. from Wisconsin

>First of all, opinion. The Glaser name is money on its own, so no kidding they'll plaster it all over anything they do! Oh boy they put him on a poster. News flash-MARKETING! You can market a pile of sawdust-I wanted to type "a pile of something else" and yes someone will buy it. Its marketing and a name- that in my eyes has been diluted and contaminated.

Destroy the name? in the process of getting that done.

Pissing off the whole turning community, there again in the process of getting that done, there a few that have gone along with this cat and mouse chase that they have created! They say it, ITS TRUE, they charge it- ITS WORTH IT!

Simply put if I go to a well known turner's shop and get a pile of shavings and market them and sell them. They had something to do with making it, is it what the product that made the name, hell no. Finally is it worth the money and hype?? NO!

Are Taylor's worth the hype, maybe. Are Oneway's, yes proven, hands down.

I'm so tired of CET, CET, CET! After all people were turning great things before they were around, heck they're still not around. And people will still turn great things when they are gone.

Lexus or Toyota? Will both go point A to B, yup. Will the ride be any different nope. Were they sold for hype alone, YES.

Same thing.

No turning tool is worth that especially when service is what IT IS!

Greg

Re: CET responses below

#8

Re: CET responses below

Sean Troy

>Life's to damn short to get so upset over a TOOL !I suppose those that are complaining have never ran into a problem when they started a project. It must be nice to be perfect. Next time, look in the mirror before you start ranting about someone else!

Re: CET responses below

#9

Re: CET responses below

Greg H. from Wisconsin

>Practice what you preach.

DONE.

Re: CET responses below

#10

Re: CET - come on guys! Long

Wilford Bickel

>Mark,

As you can see in the email listed at the end of this, I contacted CET specifically asking about purchasing the negative rake scraper. Based on Mr. Marin's answer where he stated "all tools" he had to be including the negative rake scraper in his line at that time.

I feel very sorry for everyone associated with CET as they have missed the best opportunity they will ever have to launch thier product line. Their name and interest in their products will never be higher than it was after the AAW symposium and they really missed the boat in not having thier production up to speed and tools waiting at distributors for purchase.

Seeing Mr. Marin's comments about China buying all the steel tells me he is seeing the same problems with increased prices that we have seen this past year in chemicals. Our company had to lower profit margins to allow purchasing the higher cost raw material and keep shipping to our customers - the only way to stay in business sometimes. I will be very surprised if CET will ever be able to come to full market with the problems that are already showing up - that is sad as we all had such high hopes and interest in thier product lines.

email:

Dear Mr. Bickel,

You can rest assured that I will include you on our email.

When the tools are launched, you will be able to obtain all these tools through our distributors

(Packard and craft supplies.)

No matter what, when ready, I will personally inform you.

Wish I could be in your farm right now!

Sincere Regards

Paulo Marin, ceo

CryoSteel Engineering & Technology, Inc.

Glaser Hitec

CycleStart Engineering & Technology

5699 Kanan Road #284

Agoura Hills, CA 91301

Phone (818) 338-2138 - Fax: (818) 338-2139

www.cetinc.com

-----Original Message-----

From: Wilford O. Bickel [mailto:wbickel@mindspring.com]

Sent: Thursday, April 20, 2006 1:15 PM

To: information@cetinc.com

Subject: Turning Tools

Hi,

I know your launch is scheduled for the AAW symposium in Louisville but

between owning a farm and working full time I will not be able to attend.

I met Stuart Batty last year at the Southern States Symposium and saw him

demonstrate his Negative Rake Scraper. I am very interested in purchasing

one. Is there any way you could put me on a list to mail / email me

information, pricing, how to order, etc. when you get your launch ready? I

would also like to have information on the other tools you are launching but

first and most importantly want the info on Negative Rake Scraper!

Thanks

Wilford

Re: CET responses below

#11

Re: CET responses below

Greg H. from Wisconsin

>I would like to make a public statement of apology to CET by coming off too harsh.

I have talked to customer's close to CET and seeing a little bit more of the big picture. Its not a bad picture it is not still a good picture.

They have bit off alot to chew. I do agree not having everything up to snuff in KY. hurt them and ticked off a lot of people.

I have my opinions of them and that's me.

Its a bad situation that gets worse as time goes on. And having the rights to the name Glaser, that is a personal, beloved name in the hearts of alot of turners. Having issues with it is upsetting. I think that is where a lot of us are coming from.

Greg

Re: CET responses below

#12

Re: CET responses below

Juergen

>In the software business they call this Vaporware. I agree, make available a few basic tools,especially the much talked about negative rake scraper. If nothing else this would satisfy the early adopters.

Re: CET responses below

#13

Re: CET responses below

Doug Thompson near Cleveland

>First of all, I would like thank Greg for sticking up for the little guy. Yes, I do think we are trying to protect Jerry and his tools. The fact that one person could have such a impact on the turning world is amazing. Let's face it, things do change that we can not control. The dark red handle is a thing of the past but that will always be a Glaser tool. I still have 4 in the brown paper wrappers that might be a good item to auction off one day.

I will continue to have fun making my own tools. If they work out fine and if they don't... who cares it's still fun. The reason I give tools away is find out what people really think about the shape and the steel. It's like posting a picture of your work only a tool needs to used. On the smaller tools (3/8-1/2) the out of pocket cost is not that much so why not give some away.

I wish the best to CET, Glaser and the unknown poster...

Doug Thompson

Re: CET responses below

#14

Glaser ? CET? 5/8" Bowl Gouge

Barry Turner

>I bought a Glaser ? ? ? 5/8" Bowl Gouge from the CET booth at the AAW Symposium in Louisville. At least I think it was a Glaser with V15 particle steel. It had a red handle and cost $159.95. It oughta be damned good. The experience was a little strange. The guys in the CET booth didn't seem to be too interested in selling their product. They were just kinda hanging out. When I finally asked one of the guys to sell me a gouge, he took one off display and led me across the trade show floor to the Choice Woods booth, where I paid for it. I'm so confused now, I don't know if I have a Glaser gouge or a CET gouge, or if I even give a rip!

I have used the gouge and I like it. That's about all I have to say about it. As for the rest of the CET line of tools that I saw, they're beautiful! A litttle too beautiful! Someone would have to hold a gun on me to make me put one to a grinder. As for me, "pretty" just don't but it. Let's wait and see if the really work.