We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>This is a small 6" pot, done as an example during one of my segmenting classes a couple of years ago. Bloodwood,bigleaf maple, ziracote, maple veneer and black-dyed veneer. I included it in a recent photo shoot. Finish is oil.
>Thanks John, appreciate the comments. I'm trying to think if I ever showed this one. This is the same technique I use to make my diamond pieces...one more step involving cutting the form apart on the lathe would be necessary. The base is segmented as well.
>Yes, actually everything was glued up at once... the bloodwood, the veneer, and the three maple boards. Then cut into staves using compound miters...45 degree angle through the blade with a 11.25 degree blade tilt. This one is fairly simple...they can get much more complex just by adding more contrasting pieces and making more cuts..
>You know, Keith, I'm not a fan of segmented work. However, this one caught my eye...and held it. Maybe its the colors or the sharpness (and quality) of the photo, or the shape. I dunno, but I really LIKE it.
>HI Peter, Thanks! I think a lot of segmented pieces look the same...same techniques, same basic theme. Stacked rings, a beauty ring which is always in the same place, etc. Many are way too busy.
I try to make my segmented pieces simple yet elegant...simple until you try to figure out how it's done :) I try to focus on the form, the pattern is secondary; maybe that's why?
I haven't done a seg. piece in a while BUT a very "interesting" one is in the works.